target/linux/ramips/dts/TEW-714TRU.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "trendnet,tew-714tru", "ralink,rt5350-soc";
  10         model = "TRENDnet TEW714TRU";
  11
  12         gpio-leds {
  13                 compatible = "gpio-leds";
  14
  15                 usb {
  16                         label = "tew-714tru:red:usb";
  17                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  18                         trigger-sources = <&ohci_port1>, <&ehci_port1>;
  19                         linux,default-trigger = "usbport";
  20                 };
  21
  22                 wifi {
  23                         label = "tew-714tru:green:wifi";
  24                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  25                 };
  26         };
  27
  28         gpio-keys-polled {
  29                 compatible = "gpio-keys-polled";
  30                 poll-interval = <20>;
  31
  32                 reset {
  33                         label = "reset";
  34                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  35                         linux,code = <KEY_RESTART>;
  36                 };
  37
  38                 wps {
  39                         label = "wps";
  40                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  41                         linux,code = <KEY_WPS_BUTTON>;
  42                 };
  43         };
  44
  45         gpio_export {
  46                 compatible = "gpio-export";
  47                 #size-cells = <0>;
  48
  49                 repeater {
  50                         gpio-export,name = "repeater_switch";
  51                         gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
  52                 };
  53
  54                 wisp {
  55                         gpio-export,name = "wisp_switch";
  56                         gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
  57                 };
  58         };
  59 };
  60
  61 &spi0 {
  62         status = "okay";
  63
  64         m25p80@0 {
  65                 compatible = "jedec,spi-nor";
  66                 reg = <0>;
  67                 spi-max-frequency = <10000000>;
  68
  69                 partitions {
  70                         compatible = "fixed-partitions";
  71                         #address-cells = <1>;
  72                         #size-cells = <1>;
  73
  74                         partition@0 {
  75                                 label = "u-boot";
  76                                 reg = <0x0 0x30000>;
  77                                 read-only;
  78                         };
  79
  80                         partition@30000 {
  81                                 label = "u-boot-env";
  82                                 reg = <0x30000 0x10000>;
  83                                 read-only;
  84                         };
  85
  86                         factory: partition@40000 {
  87                                 label = "factory";
  88                                 reg = <0x40000 0x10000>;
  89                                 read-only;
  90                         };
  91
  92                         partition@50000 {
  93                                 label = "firmware";
  94                                 reg = <0x50000 0x7b0000>;
  95                         };
  96                 };
  97         };
  98 };
  99
 100 &pinctrl {
 101         state_default: pinctrl0 {
 102                 gpio {
 103                         ralink,group = "i2c", "jtag", "uartf";
 104                         ralink,function = "gpio";
 105                 };
 106         };
 107 };
 108
 109 &ethernet {
 110         mtd-mac-address = <&factory 0x4>;
 111 };
 112
 113 &esw {
 114         mediatek,portmap = <0x1>;
 115         mediatek,portdisable = <0x3e>;
 116 };
 117
 118 &wmac {
 119         ralink,mtd-eeprom = <&factory 0>;
 120 };
 121
 122 &ehci {
 123         status = "okay";
 124 };
 125
 126 &ohci {
 127         status = "okay";
 128 };