ramips: move partitions into partition table node
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / TPLINK-8M.dtsi
1 #include "mt7628an.dtsi"
2
3 / {
4 chosen {
5 bootargs = "console=ttyS0,115200";
6 };
7
8 memory@0 {
9 device_type = "memory";
10 reg = <0x0 0x4000000>;
11 };
12 };
13
14 &spi0 {
15 status = "okay";
16
17 m25p80@0 {
18 compatible = "jedec,spi-nor";
19 reg = <0>;
20 spi-max-frequency = <10000000>;
21 m25p,chunked-io = <32>;
22
23 partitions {
24 compatible = "fixed-partitions";
25 #address-cells = <1>;
26 #size-cells = <1>;
27
28 partition@0 {
29 label = "boot";
30 reg = <0x0 0x20000>;
31 read-only;
32 };
33
34 partition@20000 {
35 label = "firmware";
36 reg = <0x20000 0x7a0000>;
37 };
38
39 partition@7c0000 {
40 label = "config";
41 reg = <0x7c0000 0x10000>;
42 read-only;
43 };
44
45 factory: partition@7d0000 {
46 label = "factory";
47 reg = <0x7d0000 0x30000>;
48 read-only;
49 };
50 };
51 };
52 };
53
54 &ehci {
55 status = "disabled";
56 };
57
58 &ohci {
59 status = "disabled";
60 };
61
62 &wmac {
63 status = "okay";
64 mtd-mac-address = <&factory 0xf100>;
65 mediatek,mtd-eeprom = <&factory 0x20000>;
66 };
67
68 &ethernet {
69 mtd-mac-address = <&factory 0xf100>;
70 mediatek,portmap = "llllw";
71 };