target/linux/ramips/dts/V11STFE.dts

   1 /dts-v1/;
   2
   3 #include "rt2880.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "V11ST-FE", "ralink,rt2880-soc";
   9         model = "Ralink V11ST-FE";
  10
  11         pci@440000 {
  12                 status = "okay";
  13
  14                 host-bridge {
  15                         pci-bridge@1 {
  16                                 status = "okay";
  17                         };
  18                 };
  19         };
  20
  21         nor-flash@1c000000 {
  22                 compatible = "cfi-flash";
  23                 reg = <0x1c000000 0x800000>;
  24                 bank-width = <2>;
  25                 #address-cells = <1>;
  26                 #size-cells = <1>;
  27
  28                 partition@0 {
  29                         reg = <0x0 0x0030000>;
  30                         label = "u-boot";
  31                         read-only;
  32                 };
  33
  34                 partition@30000 {
  35                         reg = <0x00030000 0x00010000>;
  36                         label = "u-boot-env";
  37                         read-only;
  38                 };
  39
  40                 factory: partition@40000 {
  41                         reg = <0x00040000 0x00010000>;
  42                         label = "factory";
  43                         read-only;
  44                 };
  45
  46                 partition@50000 {
  47                         reg = <0x00050000 0x003b0000>;
  48                         label = "firmware";
  49                 };
  50         };
  51
  52         gpio-keys-polled {
  53                 compatible = "gpio-keys-polled";
  54                 #address-cells = <1>;
  55                 #size-cells = <0>;
  56                 poll-interval = <100>;
  57
  58                 wps {
  59                         label = "wps";
  60                         gpios = <&gpio0 0 0>;
  61                         linux,code = <KEY_WPS_BUTTON>;
  62                 };
  63         };
  64
  65         gpio-leds {
  66                 compatible = "gpio-leds";
  67
  68                 status {
  69                         label = "v11st-fe:green:status";
  70                         gpios = <&gpio0 12 1>;
  71                 };
  72         };
  73 };
  74
  75 &gpio0 {
  76         status = "okay";
  77 };
  78
  79 &ethernet {
  80         status = "okay";
  81 };
  82
  83 &wmac {
  84         ralink,mtd-eeprom = <&factory 0>;
  85 };