move memory detect node to dtsi files
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / W150M.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6 compatible = "3G300M", "ralink,rt3050-soc";
7 model = "Tenda 3G300M";
8
9 palmbus@10000000 {
10 sysc@0 {
11 ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii", "jtag";
12 ralink,uartmux = "gpio";
13 ralink,wdtmux = <1>;
14 };
15
16 gpio0: gpio@600 {
17 status = "okay";
18 };
19 };
20
21 cfi@1f000000 {
22 compatible = "cfi-flash";
23 reg = <0x1f000000 0x800000>;
24
25 bank-width = <2>;
26 device-width = <2>;
27 #address-cells = <1>;
28 #size-cells = <1>;
29
30 partition@0 {
31 label = "u-boot";
32 reg = <0x0 0x30000>;
33 read-only;
34 };
35
36 partition@30000 {
37 label = "u-boot-env";
38 reg = <0x30000 0x10000>;
39 read-only;
40 };
41
42 factory: partition@40000 {
43 label = "factory";
44 reg = <0x40000 0x10000>;
45 read-only;
46 };
47
48 partition@50000 {
49 label = "firmware";
50 reg = <0x50000 0x3c8000>;
51 };
52 };
53
54 gpio-leds {
55 compatible = "gpio-leds";
56 3grouter {
57 label = "tenda:blue:3grouter";
58 gpios = <&gpio0 11 1>;
59 };
60 ap {
61 label = "tenda:blue:ap";
62 gpios = <&gpio0 12 1>;
63 };
64 wisprouter {
65 label = "tenda:blue:wisprouter";
66 gpios = <&gpio0 9 1>;
67 };
68 wirelessrouter {
69 label = "tenda:blue:wirelessrouter";
70 gpios = <&gpio0 13 1>;
71 };
72 3g {
73 label = "tenda:blue:3g";
74 gpios = <&gpio0 7 1>;
75 };
76 wpsreset {
77 label = "tenda:blue:wpsreset";
78 gpios = <&gpio0 14 1>;
79 };
80 };
81
82 gpio-keys-polled {
83 compatible = "gpio-keys-polled";
84 #address-cells = <1>;
85 #size-cells = <0>;
86 poll-interval = <20>;
87 reset {
88 label = "reset";
89 gpios = <&gpio0 0 1>;
90 linux,code = <0x198>;
91 };
92 mode {
93 label = "mode";
94 gpios = <&gpio0 10 1>;
95 linux,code = <0x100>;
96 };
97 };
98
99 ethernet@10100000 {
100 status = "okay";
101 };
102
103 esw@10110000 {
104 status = "okay";
105 ralink,portmap = <0x2f>;
106 };
107
108 wmac@10180000 {
109 status = "okay";
110 };
111 };