ramips: dts: Unify naming of gpio-led nodes
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / W150M.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "tenda,w150m", "ralink,rt3050-soc";
10 model = "Tenda W150M";
11
12 aliases {
13 led-boot = &led_ap;
14 led-failsafe = &led_ap;
15 led-running = &led_ap;
16 led-upgrade = &led_ap;
17 };
18
19 cfi@1f000000 {
20 compatible = "cfi-flash";
21 reg = <0x1f000000 0x800000>;
22 bank-width = <2>;
23 device-width = <2>;
24
25 partitions {
26 compatible = "fixed-partitions";
27 #address-cells = <1>;
28 #size-cells = <1>;
29
30 partition@0 {
31 label = "u-boot";
32 reg = <0x0 0x30000>;
33 read-only;
34 };
35
36 partition@30000 {
37 label = "u-boot-env";
38 reg = <0x30000 0x10000>;
39 read-only;
40 };
41
42 factory: partition@40000 {
43 label = "factory";
44 reg = <0x40000 0x10000>;
45 read-only;
46 };
47
48 partition@50000 {
49 compatible = "denx,uimage";
50 label = "firmware";
51 reg = <0x50000 0x3c8000>;
52 };
53 };
54 };
55
56 leds {
57 compatible = "gpio-leds";
58
59 3grouter {
60 label = "w150m:blue:3grouter";
61 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
62 };
63
64 led_ap: ap {
65 label = "w150m:blue:ap";
66 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
67 };
68
69 wisprouter {
70 label = "w150m:blue:wisprouter";
71 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
72 };
73
74 wirelessrouter {
75 label = "w150m:blue:wirelessrouter";
76 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
77 };
78
79 3g {
80 label = "w150m:blue:3g";
81 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
82 };
83
84 wpsreset {
85 label = "w150m:blue:wpsreset";
86 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
87 };
88 };
89
90 keys {
91 compatible = "gpio-keys-polled";
92 poll-interval = <20>;
93
94 reset {
95 label = "reset";
96 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
97 linux,code = <KEY_RESTART>;
98 };
99
100 mode {
101 label = "mode";
102 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
103 linux,code = <BTN_0>;
104 };
105 };
106 };
107
108 &pinctrl {
109 state_default: pinctrl0 {
110 gpio {
111 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
112 ralink,function = "gpio";
113 };
114 };
115 };
116
117 &ethernet {
118 mtd-mac-address = <&factory 0x4>;
119 };
120
121 &esw {
122 mediatek,portmap = <0x2f>;
123 };
124
125 &wmac {
126 ralink,mtd-eeprom = <&factory 0>;
127 };