ramips: dts: Unify naming of gpio-led nodes
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / W306R_V20.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "tenda,w306r-v2", "ralink,rt3052-soc";
10 model = "Tenda W306R V2.0";
11
12 aliases {
13 led-boot = &led_sys;
14 led-failsafe = &led_sys;
15 led-running = &led_sys;
16 led-upgrade = &led_sys;
17 };
18
19 cfi@1f000000 {
20 compatible = "cfi-flash";
21 reg = <0x1f000000 0x800000>;
22 bank-width = <2>;
23 device-width = <2>;
24
25 partitions {
26 compatible = "fixed-partitions";
27 #address-cells = <1>;
28 #size-cells = <1>;
29
30 partition@0 {
31 label = "u-boot";
32 reg = <0x0 0x30000>;
33 read-only;
34 };
35
36 partition@30000 {
37 label = "u-boot-env";
38 reg = <0x30000 0x10000>;
39 read-only;
40 };
41
42 factory: partition@40000 {
43 label = "factory";
44 reg = <0x40000 0x10000>;
45 read-only;
46 };
47
48 partition@50000 {
49 compatible = "denx,uimage";
50 label = "firmware";
51 reg = <0x50000 0x3b0000>;
52 };
53 };
54 };
55
56 leds {
57 compatible = "gpio-leds";
58
59 led_sys: sys {
60 label = "w306r-v20:green:sys";
61 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
62 };
63
64 wps {
65 label = "w306r-v20:green:wps";
66 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
67 };
68 };
69
70 keys {
71 compatible = "gpio-keys-polled";
72 poll-interval = <20>;
73
74 reset {
75 label = "RESET/WPS";
76 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
77 linux,code = <KEY_RESTART>;
78 };
79 };
80 };
81
82 &pinctrl {
83 state_default: pinctrl0 {
84 gpio {
85 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
86 ralink,function = "gpio";
87 };
88 };
89 };
90
91 &ethernet {
92 mtd-mac-address = <&factory 0x28>;
93 };
94
95 &esw {
96 mediatek,portmap = <0x3e>;
97 };
98
99 &wmac {
100 ralink,mtd-eeprom = <&factory 0>;
101 };