ramips: dts: Unify naming of gpio-led nodes
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / WCR-1166DS.dts
1 /dts-v1/;
2
3 #include "mt7628an.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "buffalo,wcr-1166ds", "mediatek,mt7628an-soc";
10 model = "Buffalo WCR-1166DS";
11
12 aliases {
13 led-boot = &led_power;
14 led-failsafe = &led_power;
15 led-running = &led_power;
16 led-upgrade = &led_power;
17 };
18
19 keys {
20 compatible = "gpio-keys-polled";
21 poll-interval = <20>;
22
23 aoss {
24 label = "aoss";
25 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
26 linux,code = <KEY_WPS_BUTTON>;
27 };
28
29 ap {
30 label = "ap";
31 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
32 linux,code = <BTN_0>;
33 linux,input-type = <EV_SW>;
34 };
35
36 reset {
37 label = "reset";
38 gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
39 linux,code = <KEY_RESTART>;
40 };
41 };
42
43 leds {
44 compatible = "gpio-leds";
45
46 router_o {
47 label = "wcr-1166ds:orange:router";
48 gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
49 };
50
51 router_g {
52 label = "wcr-1166ds:green:router";
53 gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
54 };
55
56 internet_o {
57 label = "wcr-1166ds:orange:internet";
58 gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
59 };
60
61 internet_g {
62 label = "wcr-1166ds:green:internet";
63 gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
64 };
65
66 wireless_o {
67 label = "wcr-1166ds:orange:wireless";
68 gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
69 };
70
71 wireless_g {
72 label = "wcr-1166ds:green:wireless";
73 gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
74 };
75
76 diag {
77 label = "wcr-1166ds:orange:diag";
78 gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
79 };
80
81 led_power: power {
82 label = "wcr-1166ds:green:power";
83 gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
84 };
85 };
86 };
87
88 &ehci {
89 status = "disabled";
90 };
91
92 &esw {
93 mediatek,portmap = <0x2f>;
94 mediatek,portdisable = <0x27>;
95 };
96
97 &ohci {
98 status = "disabled";
99 };
100
101 &pcie {
102 status = "okay";
103 };
104
105 &pcie0 {
106 mt76@0,0 {
107 reg = <0x0000 0 0 0 0>;
108 mediatek,mtd-eeprom = <&factory 0x8000>;
109 ieee80211-freq-limit = <5000000 6000000>;
110 };
111 };
112
113 &pinctrl {
114 state_default: pinctrl0 {
115 gpio {
116 ralink,group = "uart1", "wled_an", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt", "refclk", "gpio", "i2s";
117 ralink,function = "gpio";
118 };
119 };
120 };
121
122 &spi0 {
123 status = "okay";
124
125 m25p80@0 {
126 compatible = "jedec,spi-nor";
127 reg = <0>;
128 spi-max-frequency = <10000000>;
129 m25p,chunked-io = <32>;
130
131 partitions {
132 compatible = "fixed-partitions";
133 #address-cells = <1>;
134 #size-cells = <1>;
135
136 partition@0 {
137 label = "u-boot";
138 reg = <0x0 0x30000>;
139 read-only;
140 };
141
142 partition@30000 {
143 label = "u-boot-env";
144 reg = <0x30000 0x10000>;
145 read-only;
146 };
147
148 factory: partition@40000 {
149 label = "factory";
150 reg = <0x40000 0x10000>;
151 read-only;
152 };
153
154 partition@50000 {
155 compatible = "openwrt,trx";
156 label = "firmware";
157 reg = <0x50000 0x7c0000>;
158 };
159
160 partition@810000 {
161 label = "firmware2";
162 reg = <0x810000 0x7c0000>;
163 };
164
165 partition@fd0000 {
166 label = "glbcfg";
167 reg = <0xfd0000 0x10000>;
168 read-only;
169 };
170
171 partition@fe0000 {
172 label = "board_data";
173 reg = <0xfe0000 0x10000>;
174 read-only;
175 };
176 };
177 };
178 };
179
180 &wmac {
181 status = "okay";
182 };