ramips: remove top-level {address,size}-cells properties from .dts files
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / WCR150GN.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6 compatible = "WCR150GN", "ralink,rt3052-soc";
7 model = "Sparklan WCR-150GN";
8
9 memorydetect {
10 ralink,memory = <0x0 0x200000 0x4000000>;
11 };
12
13 chosen {
14 bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
15 };
16
17 palmbus@10000000 {
18 sysc@0 {
19 ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
20 ralink,uartmux = "gpio";
21 ralink,wdtmux = <1>;
22 };
23
24 gpio0: gpio@600 {
25 status = "okay";
26 };
27 };
28
29 cfi@1f000000 {
30 compatible = "cfi-flash";
31 reg = <0x1f000000 0x800000>;
32
33 bank-width = <2>;
34 device-width = <2>;
35 #address-cells = <1>;
36 #size-cells = <1>;
37 };
38
39 gpio-leds {
40 compatible = "gpio-leds";
41 user {
42 label = "wcr150gn:amber:user";
43 gpios = <&gpio0 12 1>;
44 };
45 power {
46 label = "wcr150gn:amber:power";
47 gpios = <&gpio0 8 1>;
48 };
49 };
50
51 gpio-keys-polled {
52 compatible = "gpio-keys-polled";
53 #address-cells = <1>;
54 #size-cells = <0>;
55 poll-interval = <20>;
56 wps {
57 label = "wps";
58 gpios = <&gpio0 10 1>;
59 linux,code = <0x211>;
60 };
61 reset {
62 label = "reset";
63 gpios = <&gpio0 0 1>;
64 linux,code = <0x198>;
65 };
66 };
67
68 ethernet@10100000 {
69 status = "okay";
70 };
71
72 esw@10110000 {
73 status = "okay";
74 ralink,portmap = <0x2f>;
75 };
76
77 wmac@10180000 {
78 status = "okay";
79 };
80
81 otg@101c0000 {
82 status = "okay";
83 };
84 };