target/linux/ramips/dts/WD03.dts

   1 /dts-v1/;
   2
   3 #include "mt7620n.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "ravpower,wd03", "ralink,mt7620n-soc";
  10         model = "Ravpower WD03";
  11
  12         chosen {
  13                 bootargs = "console=ttyS0,115200";
  14         };
  15
  16         gpio-leds {
  17                 compatible = "gpio-leds";
  18
  19                 green-wifi {
  20                         label = "wd03:green:wifi";
  21                         gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
  22                 };
  23
  24
  25                 blue-wifi {
  26                         label = "wd03:blue:wifi";
  27                         gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
  28                 };
  29         };
  30
  31         keys {
  32                 compatible = "gpio-keys-polled";
  33                 poll-interval = <20>;
  34
  35                 reset {
  36                         label = "reset";
  37                         gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
  38                         linux,code = <KEY_RESTART>;
  39                 };
  40         };
  41 };
  42
  43 &gpio2 {
  44         status = "okay";
  45 };
  46
  47 &gpio3 {
  48         status = "okay";
  49 };
  50
  51 &i2c {
  52         status = "okay";
  53 };
  54
  55 &spi0 {
  56         status = "okay";
  57
  58         m25p80@0 {
  59                 compatible = "jedec,spi-nor";
  60                 reg = <0>;
  61                 spi-max-frequency = <10000000>;
  62
  63                 partitions {
  64                         compatible = "fixed-partitions";
  65                         #address-cells = <1>;
  66                         #size-cells = <1>;
  67
  68                         partition@0 {
  69                                 label = "u-boot";
  70                                 reg = <0x0 0x30000>;
  71                                 read-only;
  72                         };
  73
  74                         partition@30000 {
  75                                 label = "u-boot-env";
  76                                 reg = <0x30000 0x10000>;
  77                                 read-only;
  78                         };
  79
  80                         factory: partition@40000 {
  81                                 label = "factory";
  82                                 reg = <0x40000 0x10000>;
  83                                 read-only;
  84                         };
  85
  86                         partition@50000 {
  87                                 compatible = "denx,uimage";
  88                                 label = "firmware";
  89                                 reg = <0x50000 0x7b0000>;
  90                         };
  91                 };
  92         };
  93 };
  94
  95 &ehci {
  96         status = "okay";
  97 };
  98
  99 &ohci {
 100         status = "okay";
 101 };
 102
 103 &ethernet {
 104         mtd-mac-address = <&factory 0x4000>;
 105         ralink,port-map = "wllll";
 106 };
 107
 108 &wmac {
 109         ralink,mtd-eeprom = <&factory 0>;
 110 };
 111
 112 &pinctrl {
 113         state_default: pinctrl0 {
 114                 gpio {
 115                         ralink,group = "wled", "ephy";
 116                         ralink,function = "gpio";
 117                 };
 118         };
 119 };