40152876d6e3f913d38dc290e4a2405fae7116d8
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / WHR-1166D.dts
1 /dts-v1/;
2
3 #include "mt7620a.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "buffalo,whr-1166d", "ralink,mt7620a-soc";
10 model = "Buffalo WHR-1166D";
11
12 aliases {
13 led-boot = &led_power_green;
14 led-failsafe = &led_power_green;
15 led-running = &led_power_green;
16 led-upgrade = &led_power_green;
17 };
18
19 gpio-leds {
20 compatible = "gpio-leds";
21
22 power {
23 label = "whr-1166d:red:power";
24 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
25 };
26
27 wifi {
28 label = "whr-1166d:green:wifi";
29 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
30 };
31
32 led_power_green: power2 {
33 label = "whr-1166d:green:power";
34 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
35 };
36
37 wifi2 {
38 label = "whr-1166d:orange:wifi";
39 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
40 };
41
42 internet {
43 label = "whr-1166d:green:internet";
44 gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
45 };
46
47 router {
48 label = "whr-1166d:orange:router";
49 gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
50 };
51
52 router2 {
53 label = "whr-1166d:green:router";
54 gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
55 };
56 };
57
58 keys {
59 compatible = "gpio-keys-polled";
60 poll-interval = <20>;
61
62 reset {
63 label = "reset";
64 gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
65 linux,code = <KEY_RESTART>;
66 };
67
68 aoss {
69 label = "aoss";
70 gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
71 linux,code = <KEY_WPS_BUTTON>;
72 };
73
74 ap {
75 label = "ap";
76 gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
77 linux,code = <BTN_0>;
78 linux,input-type = <EV_SW>;
79 };
80
81 bridge {
82 label = "bridge";
83 gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
84 linux,code = <BTN_0>;
85 linux,input-type = <EV_SW>;
86 };
87 };
88 };
89
90 &gpio2 {
91 status = "okay";
92 };
93
94 &spi0 {
95 status = "okay";
96
97 m25p80@0 {
98 compatible = "jedec,spi-nor";
99 reg = <0>;
100 spi-max-frequency = <10000000>;
101
102 partitions {
103 compatible = "fixed-partitions";
104 #address-cells = <1>;
105 #size-cells = <1>;
106
107 partition@0 {
108 label = "u-boot";
109 reg = <0x0 0x30000>;
110 read-only;
111 };
112
113 partition@30000 {
114 label = "u-boot-env";
115 reg = <0x30000 0x10000>;
116 read-only;
117 };
118
119 factory: partition@40000 {
120 label = "factory";
121 reg = <0x40000 0x10000>;
122 read-only;
123 };
124
125 partition@50000 {
126 compatible = "denx,uimage";
127 label = "firmware";
128 reg = <0x50000 0xfb0000>;
129 };
130 };
131 };
132 };
133
134 &pinctrl {
135 state_default: pinctrl0 {
136 gpio {
137 ralink,group = "i2c", "uartf", "wled", "nd_sd";
138 ralink,function = "gpio";
139 };
140 };
141 };
142
143 &ethernet {
144 pinctrl-names = "default";
145 pinctrl-0 = <&rgmii1_pins &mdio_pins>;
146
147 port@5 {
148 status = "okay";
149 phy-handle = <&phy5>;
150 phy-mode = "rgmii";
151 };
152
153 mdio-bus {
154 status = "okay";
155
156 phy5: ethernet-phy@5 {
157 reg = <5>;
158 phy-mode = "rgmii-rxid";
159 };
160 };
161 };
162
163 &gsw {
164 mediatek,port4 = "ephy";
165 };
166
167 &wmac {
168 ralink,mtd-eeprom = <&factory 0>;
169 };
170
171 &pcie {
172 status = "okay";
173 };
174
175 &pcie0 {
176 wifi@0,0 {
177 compatible = "pci0,0";
178 reg = <0x0000 0 0 0 0>;
179 mediatek,mtd-eeprom = <&factory 0x8000>;
180 ieee80211-freq-limit = <5000000 6000000>;
181 };
182 };