0966b60aad0d6a35dff211dccd9928d41b85db3b
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / WHR-G300N.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "buffalo,whr-g300n", "ralink,rt3052-soc";
10 model = "Buffalo WHR-G300N";
11
12 aliases {
13 led-boot = &led_router;
14 led-failsafe = &led_router;
15 led-running = &led_router;
16 led-upgrade = &led_router;
17 };
18
19 cfi@1f000000 {
20 compatible = "cfi-flash";
21 reg = <0x1f000000 0x800000>;
22 bank-width = <2>;
23 device-width = <2>;
24
25 partitions {
26 compatible = "fixed-partitions";
27 #address-cells = <1>;
28 #size-cells = <1>;
29
30 partition@0 {
31 label = "u-boot";
32 reg = <0x0 0x30000>;
33 read-only;
34 };
35
36 partition@30000 {
37 label = "u-boot-env";
38 reg = <0x30000 0x10000>;
39 read-only;
40 };
41
42 factory: partition@40000 {
43 label = "factory";
44 reg = <0x40000 0x10000>;
45 read-only;
46 };
47
48 partition@50000 {
49 compatible = "denx,uimage";
50 label = "firmware";
51 reg = <0x50000 0x3a0000>;
52 };
53
54 partition@3f0000 {
55 label = "user";
56 reg = <0x3f0000 0x10000>;
57 read-only;
58 };
59 };
60 };
61
62 gpio-leds {
63 compatible = "gpio-leds";
64
65 diag {
66 label = "whr-g300n:red:diag";
67 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
68 };
69
70 led_router: router {
71 label = "whr-g300n:green:router";
72 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
73 };
74
75 security {
76 label = "whr-g300n:amber:security";
77 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
78 };
79 };
80
81 keys {
82 compatible = "gpio-keys-polled";
83 poll-interval = <20>;
84
85 reset {
86 label = "reset";
87 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
88 linux,code = <KEY_RESTART>;
89 };
90
91 aoss {
92 label = "aoss";
93 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
94 linux,code = <KEY_WPS_BUTTON>;
95 };
96
97 router-off {
98 label = "router-off";
99 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
100 linux,code = <BTN_2>;
101 };
102
103 router-on {
104 label = "router-on";
105 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
106 linux,code = <BTN_3>;
107 };
108 };
109 };
110
111 &pinctrl {
112 state_default: pinctrl0 {
113 gpio {
114 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
115 ralink,function = "gpio";
116 };
117 };
118 };
119
120 &ethernet {
121 mtd-mac-address = <&factory 0x4>;
122 };
123
124 &esw {
125 mediatek,portmap = <0x2f>;
126 };
127
128 &wmac {
129 ralink,mtd-eeprom = <&factory 0>;
130 };