target/linux/ramips/dts/WHR-G300N.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "WHR-G300N", "ralink,rt3052-soc";
   7         model = "Buffalo WHR-G300N";
   8
   9         cfi@1f000000 {
  10                 compatible = "cfi-flash";
  11                 reg = <0x1f000000 0x800000>;
  12                 bank-width = <2>;
  13                 device-width = <2>;
  14                 #address-cells = <1>;
  15                 #size-cells = <1>;
  16         };
  17
  18         gpio-leds {
  19                 compatible = "gpio-leds";
  20
  21                 diag {
  22                         label = "whr-g300n:red:diag";
  23                         gpios = <&gpio0 7 1>;
  24                 };
  25
  26                 router {
  27                         label = "whr-g300n:green:router";
  28                         gpios = <&gpio0 9 1>;
  29                 };
  30
  31                 security {
  32                         label = "whr-g300n:amber:security";
  33                         gpios = <&gpio0 14 1>;
  34                 };
  35         };
  36
  37         gpio-keys-polled {
  38                 compatible = "gpio-keys-polled";
  39                 #address-cells = <1>;
  40                 #size-cells = <0>;
  41                 poll-interval = <20>;
  42
  43                 reset {
  44                         label = "reset";
  45                         gpios = <&gpio0 10 1>;
  46                         linux,code = <0x198>;
  47                 };
  48
  49                 aoss {
  50                         label = "aoss";
  51                         gpios = <&gpio0 0 1>;
  52                         linux,code = <0x211>;
  53                 };
  54
  55                 router-off {
  56                         label = "router-off";
  57                         gpios = <&gpio0 11 1>;
  58                         linux,code = <0x102>;
  59                 };
  60
  61                 router-on {
  62                         label = "router-on";
  63                         gpios = <&gpio0 8 1>;
  64                         linux,code = <0x103>;
  65                 };
  66         };
  67 };
  68
  69 &pinctrl {
  70         state_default: pinctrl0 {
  71                 gpio {
  72                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  73                         ralink,function = "gpio";
  74                 };
  75         };
  76 };
  77
  78 &esw {
  79         mediatek,portmap = <0x2f>;
  80 };
  81
  82 /* FIXME: no partitions defined */
  83 /*&wmac {
  84         ralink,mtd-eeprom = <&factory 0>;
  85 };
  86 */