target/linux/ramips/dts/WIZARD8800.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 / {
   6         compatible = "WIZARD8800", "ralink,rt5350-soc";
   7         model = "EASYACC WI-STOR WIZARD 8800";
   8 };
   9
  10 &gpio0 {
  11         status = "okay";
  12 };
  13
  14 &gpio1 {
  15         status = "okay";
  16 };
  17
  18 &spi0 {
  19         status = "okay";
  20
  21         m25p80@0 {
  22                 #address-cells = <1>;
  23                 #size-cells = <1>;
  24                 compatible = "jedec,spi-nor";
  25                 reg = <0 0>;
  26                 linux,modalias = "m25p80", "w25q32";
  27                 spi-max-frequency = <10000000>;
  28
  29                 partition@0 {
  30                         label = "u-boot";
  31                         reg = <0x0 0x30000>;
  32                         read-only;
  33                 };
  34
  35                 partition@30000 {
  36                         label = "u-boot-env";
  37                         reg = <0x30000 0x10000>;
  38                         read-only;
  39                 };
  40
  41                 factory: partition@40000 {
  42                         label = "factory";
  43                         reg = <0x40000 0x10000>;
  44                         read-only;
  45                 };
  46
  47                 partition@50000 {
  48                         label = "firmware";
  49                         reg = <0x50000 0x7b0000>;
  50                 };
  51         };
  52 };
  53
  54 &pinctrl {
  55         state_default: pinctrl0 {
  56                 gpio {
  57                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  58                         ralink,function = "gpio";
  59                 };
  60         };
  61 };
  62
  63 &ethernet {
  64         mtd-mac-address = <&factory 0x4>;
  65 };
  66
  67 &esw {
  68         mediatek,portmap = <0x2f>;
  69 };
  70
  71 &ehci {
  72         status = "okay";
  73 };
  74
  75 &ohci {
  76         status = "okay";
  77 };
  78
  79 &wmac {
  80         ralink,mtd-eeprom = <&factory 0>;
  81 };