target/linux/ramips/dts/WIZFI630A.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "wiznet,wizfi630a", "ralink,rt5350-soc";
  10         model = "WIZnet WizFi630A";
  11
  12         aliases {
  13                 led-boot = &led_run;
  14                 led-failsafe = &led_run;
  15                 led-running = &led_run;
  16                 led-upgrade = &led_run;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS1,115200";
  21         };
  22
  23         gpio-leds {
  24                 compatible = "gpio-leds";
  25
  26                 led_run: run {
  27                         label = "wizfi630a::run";
  28                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  29                 };
  30
  31                 wps {
  32                         label = "wizfi630a::wps";
  33                         gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
  34                 };
  35
  36                 uart1 {
  37                         label = "wizfi630a::uart1";
  38                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 uart2 {
  42                         label = "wizfi630a::uart2";
  43                         gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
  44                 };
  45         };
  46
  47         gpio-keys-polled {
  48                 compatible = "gpio-keys-polled";
  49                 poll-interval = <20>;
  50
  51                 reset {
  52                         label = "reset";
  53                         gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
  54                         linux,code = <KEY_RESTART>;
  55                 };
  56
  57                 wps {
  58                         label = "wps";
  59                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  60                         linux,code = <KEY_WPS_BUTTON>;
  61                 };
  62
  63                 scm1 {
  64                         label = "SCM1";
  65                         gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
  66                         linux,code = <BTN_0>;
  67                 };
  68
  69                 scm2 {
  70                         label = "SCM2";
  71                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  72                         linux,code = <BTN_1>;
  73                 };
  74         };
  75 };
  76
  77 &gpio1 {
  78         status = "okay";
  79 };
  80
  81 &spi0 {
  82         status = "okay";
  83
  84         m25p80@0 {
  85                 compatible = "jedec,spi-nor";
  86                 reg = <0>;
  87                 spi-max-frequency = <10000000>;
  88
  89                 partitions {
  90                         compatible = "fixed-partitions";
  91                         #address-cells = <1>;
  92                         #size-cells = <1>;
  93
  94                         partition@0 {
  95                                 #size-cells = <1>;
  96                                 label = "uboot";
  97                                 reg = <0x0 0x30000>;
  98                                 read-only;
  99                         };
 100
 101                         partition@30000 {
 102                                 #size-cells = <1>;
 103                                 label = "uboot-env";
 104                                 reg = <0x30000 0x10000>;
 105                                 read-only;
 106                         };
 107
 108                         factory: partition@40000 {
 109                                 #size-cells = <1>;
 110                                 label = "factory";
 111                                 reg = <0x40000 0x10000>;
 112                                 read-only;
 113                         };
 114
 115                         partition@50000 {
 116                                 compatible = "denx,uimage";
 117                                 #size-cells = <1>;
 118                                 label = "firmware";
 119                                 reg = <0x50000 0xfb0000>;
 120                         };
 121                 };
 122         };
 123 };
 124
 125 &uart {
 126         status = "okay";
 127         pinctrl-names = "default";
 128         pinctrl-0 = <&uartf_pins>;
 129 };
 130
 131 &pinctrl {
 132         state_default: pinctrl0 {
 133                 gpio {
 134                         ralink,group = "i2c", "jtag" ;
 135                         ralink,function = "gpio";
 136                 };
 137         };
 138 };
 139
 140 &ethernet {
 141         mtd-mac-address = <&factory 0x4>;
 142 };
 143
 144 &esw {
 145         mediatek,portmap = <0x17>;
 146 };
 147
 148 &wmac {
 149         ralink,mtd-eeprom = <&factory 0>;
 150 };
 151
 152 &ehci {
 153         status = "okay";
 154 };
 155
 156 &ohci {
 157         status = "okay";
 158 };