target/linux/ramips/dts/WL-330N3G.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "asus,wl-330n3g", "ralink,rt3050-soc";
  10         model = "Asus WL-330N3G";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         gpio-leds {
  20                 compatible = "gpio-leds";
  21
  22                 3g {
  23                         label = "wl-330n3g:blue:3g";
  24                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  25                 };
  26
  27                 3g2 {
  28                         label = "wl-330n3g:red:3g";
  29                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 led_power: power {
  33                         label = "wl-330n3g:blue:power";
  34                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  35                 };
  36         };
  37
  38         gpio-keys-polled {
  39                 compatible = "gpio-keys-polled";
  40                 poll-interval = <20>;
  41
  42                 reset {
  43                         label = "reset";
  44                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  45                         linux,code = <KEY_RESTART>;
  46                 };
  47
  48                 wps {
  49                         label = "wps";
  50                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  51                         linux,code = <KEY_RESTART>;
  52                 };
  53         };
  54 };
  55
  56 &spi0 {
  57         status = "okay";
  58
  59         m25p80@0 {
  60                 compatible = "jedec,spi-nor";
  61                 reg = <0>;
  62                 spi-max-frequency = <10000000>;
  63
  64                 partitions {
  65                         compatible = "fixed-partitions";
  66                         #address-cells = <1>;
  67                         #size-cells = <1>;
  68
  69                         partition@0 {
  70                                 label = "u-boot";
  71                                 reg = <0x0 0x30000>;
  72                                 read-only;
  73                         };
  74
  75                         partition@30000 {
  76                                 label = "u-boot-env";
  77                                 reg = <0x30000 0x10000>;
  78                                 read-only;
  79                         };
  80
  81                         factory: partition@40000 {
  82                                 label = "factory";
  83                                 reg = <0x40000 0x10000>;
  84                                 read-only;
  85                         };
  86
  87                         partition@50000 {
  88                                 compatible = "denx,uimage";
  89                                 label = "firmware";
  90                                 reg = <0x50000 0x3b0000>;
  91                         };
  92                 };
  93         };
  94 };
  95
  96 &pinctrl {
  97         state_default: pinctrl0 {
  98                 gpio {
  99                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
 100                         ralink,function = "gpio";
 101                 };
 102         };
 103 };
 104
 105 &ethernet {
 106         mtd-mac-address = <&factory 0x4>;
 107 };
 108
 109 &esw {
 110         mediatek,portmap = <0x3e>;
 111 };
 112
 113 &wmac {
 114         ralink,mtd-eeprom = <&factory 0>;
 115 };
 116
 117 &otg {
 118         status = "okay";
 119 };