ramips: dts: Unify naming of gpio-led nodes
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / WLR-6000.dts
1 /dts-v1/;
2
3 #include "rt3883.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "sitecom,wlr-6000", "ralink,rt3883-soc";
10 model = "Sitecom WLR-6000";
11
12 aliases {
13 led-boot = &led_power;
14 led-failsafe = &led_power;
15 led-running = &led_power;
16 led-upgrade = &led_power;
17 };
18
19 keys {
20 compatible = "gpio-keys-polled";
21 poll-interval = <20>;
22
23 reset {
24 label = "reset";
25 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
26 linux,code = <KEY_RESTART>;
27 };
28 };
29
30 leds {
31 compatible = "gpio-leds";
32
33 led_power: power {
34 label = "wlr-6000:red:power";
35 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
36 };
37
38 ops {
39 label = "wlr-6000:white:ops";
40 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
41 };
42 };
43
44 gpio_export {
45 compatible = "gpio-export";
46 #size-cells = <0>;
47
48 usb {
49 gpio-export,name = "usb";
50 gpio-export,output = <1>;
51 gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
52 };
53 };
54 };
55
56 &gpio1 {
57 status = "okay";
58 };
59
60 &pinctrl {
61 state_default: pinctrl0 {
62 gpio {
63 ralink,group = "i2c", "jtag", "uartf";
64 ralink,function = "gpio";
65 };
66 };
67 };
68
69 &ethernet {
70 status = "okay";
71 mtd-mac-address = <&factory 0x8004>;
72 mtd-mac-address-increment = <1>;
73
74 port@0 {
75 phy-handle = <&phy0>;
76 phy-mode = "rgmii";
77 };
78
79 mdio-bus {
80 status = "okay";
81
82 phy0: ethernet-phy@0 {
83 reg = <0>;
84 phy-mode = "rgmii";
85
86 qca,ar8327-initvals = <
87 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
88 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
89 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
90 0x50 0xc437c437 /* LED Control Register 0 */
91 0x54 0xc337c337 /* LED Control Register 1 */
92 0x58 0x00000000 /* LED Control Register 2 */
93 0x5c 0x03ffff00 /* LED Control Register 3 */
94 0x7c 0x0000007e /* PORT0_STATUS */
95 0x94 0x0000007e /* PORT6 STATUS */
96 >;
97 };
98 };
99 };
100
101 &spi0 {
102 status = "okay";
103
104 m25p80@0 {
105 compatible = "jedec,spi-nor";
106 reg = <0>;
107 spi-max-frequency = <8600000>;
108 m25p,fast-read;
109
110 partitions {
111 compatible = "fixed-partitions";
112 #address-cells = <1>;
113 #size-cells = <1>;
114
115 partition@0 {
116 label = "u-boot";
117 reg = <0x0 0x30000>;
118 read-only;
119 };
120
121 partition@30000 {
122 label = "u-boot-env";
123 reg = <0x30000 0x10000>;
124 read-only;
125 };
126
127 factory: partition@40000 {
128 label = "factory";
129 reg = <0x40000 0x10000>;
130 read-only;
131 };
132
133 partition@50000 {
134 compatible = "denx,uimage";
135 label = "firmware";
136 reg = <0x50000 0x713000>;
137 };
138
139 partition@763000 {
140 label = "manufacture";
141 reg = <0x763000 0x7D000>;
142 read-only;
143 };
144
145 partition@7E0000 {
146 label = "backup";
147 reg = <0x7E0000 0x10000>;
148 read-only;
149 };
150
151 partition@7F0000 {
152 label = "storage";
153 reg = <0x7F0000 0x10000>;
154 read-only;
155 };
156 };
157 };
158 };
159
160 &pci {
161 status = "okay";
162 };
163
164 &pci1 {
165 status = "okay";
166
167 wifi@0,0 {
168 compatible = "pci1814,3091";
169 reg = <0x10000 0 0 0 0>;
170 ralink,mtd-eeprom = <&factory 0x8000>;
171 };
172 };
173
174 &wmac {
175 status = "okay";
176 ralink,2ghz = <0>;
177 ralink,mtd-eeprom = <&factory 0x0>;
178 };
179
180 &ehci {
181 status = "okay";
182 };
183
184 &ohci {
185 status = "okay";
186 };