target/linux/ramips/dts/WLR-6000.dts

   1 /dts-v1/;
   2
   3 #include "rt3883.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "sitecom,wlr-6000", "ralink,rt3883-soc";
  10         model = "Sitecom WLR-6000";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         gpio-keys-polled {
  20                 compatible = "gpio-keys-polled";
  21                 poll-interval = <20>;
  22
  23                 reset {
  24                         label = "reset";
  25                         gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
  26                         linux,code = <KEY_RESTART>;
  27                 };
  28         };
  29
  30         gpio-leds {
  31                 compatible = "gpio-leds";
  32
  33                 led_power: power {
  34                         label = "wlr-6000:red:power";
  35                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  36                 };
  37
  38                 ops {
  39                         label = "wlr-6000:white:ops";
  40                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  41                 };
  42         };
  43
  44         gpio_export {
  45                 compatible = "gpio-export";
  46                 #size-cells = <0>;
  47
  48                 usb {
  49                         gpio-export,name = "usb";
  50                         gpio-export,output = <1>;
  51                         gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
  52                 };
  53         };
  54 };
  55
  56 &gpio1 {
  57         status = "okay";
  58 };
  59
  60 &pinctrl {
  61         state_default: pinctrl0 {
  62                 gpio {
  63                         ralink,group = "i2c", "jtag", "uartf";
  64                         ralink,function = "gpio";
  65                 };
  66         };
  67 };
  68
  69 &ethernet {
  70         status = "okay";
  71         mtd-mac-address = <&factory 0x8004>;
  72         mtd-mac-address-increment = <1>;
  73
  74         port@0 {
  75                 phy-handle = <&phy0>;
  76                 phy-mode = "rgmii";
  77         };
  78
  79         mdio-bus {
  80                 status = "okay";
  81
  82                 phy0: ethernet-phy@0 {
  83                         reg = <0>;
  84                         phy-mode = "rgmii";
  85
  86                         qca,ar8327-initvals = <
  87                                 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
  88                                 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
  89                                 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
  90                                 0x50 0xc437c437 /* LED Control Register 0 */
  91                                 0x54 0xc337c337 /* LED Control Register 1 */
  92                                 0x58 0x00000000 /* LED Control Register 2 */
  93                                 0x5c 0x03ffff00 /* LED Control Register 3 */
  94                                 0x7c 0x0000007e /* PORT0_STATUS */
  95                                 0x94 0x0000007e /* PORT6 STATUS */
  96                         >;
  97                 };
  98         };
  99 };
 100
 101 &spi0 {
 102         status = "okay";
 103
 104         m25p80@0 {
 105                 compatible = "jedec,spi-nor";
 106                 reg = <0>;
 107                 spi-max-frequency = <8600000>;
 108                 m25p,fast-read;
 109
 110                 partitions {
 111                         compatible = "fixed-partitions";
 112                         #address-cells = <1>;
 113                         #size-cells = <1>;
 114
 115                         partition@0 {
 116                                 label = "u-boot";
 117                                 reg = <0x0 0x30000>;
 118                                 read-only;
 119                         };
 120
 121                         partition@30000 {
 122                                 label = "u-boot-env";
 123                                 reg = <0x30000 0x10000>;
 124                                 read-only;
 125                         };
 126
 127                         factory: partition@40000 {
 128                                 label = "factory";
 129                                 reg = <0x40000 0x10000>;
 130                                 read-only;
 131                         };
 132
 133                         partition@50000 {
 134                                 label = "firmware";
 135                                 reg = <0x50000 0x713000>;
 136                         };
 137
 138                         partition@763000 {
 139                                 label = "manufacture";
 140                                 reg = <0x763000 0x7D000>;
 141                                 read-only;
 142                         };
 143
 144                         partition@7E0000 {
 145                                 label = "backup";
 146                                 reg = <0x7E0000 0x10000>;
 147                                 read-only;
 148                         };
 149
 150                         partition@7F0000 {
 151                                 label = "storage";
 152                                 reg = <0x7F0000 0x10000>;
 153                                 read-only;
 154                         };
 155                 };
 156         };
 157 };
 158
 159 &pci {
 160         status = "okay";
 161 };
 162
 163 &pci1 {
 164         status = "okay";
 165
 166         wifi@0,0 {
 167                 compatible = "pci1814,3091";
 168                 reg = <0x10000 0 0 0 0>;
 169                 ralink,mtd-eeprom = <&factory 0x8000>;
 170         };
 171 };
 172
 173 &wmac {
 174         status = "okay";
 175         ralink,2ghz = <0>;
 176         ralink,mtd-eeprom = <&factory 0x0>;
 177 };
 178
 179 &ehci {
 180         status = "okay";
 181 };
 182
 183 &ohci {
 184         status = "okay";
 185 };