move memory detect node to dtsi files
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / WL_330N3G.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6 compatible = "WL_330N3G", "ralink,rt3050-soc";
7 model = "Asus WL-330N3G";
8
9 palmbus@10000000 {
10 sysc@0 {
11 ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
12 ralink,uartmux = "gpio";
13 ralink,wdtmux = <1>;
14 };
15
16 gpio0: gpio@600 {
17 status = "okay";
18 };
19
20 spi@b00 {
21 status = "okay";
22 m25p80@0 {
23 #address-cells = <1>;
24 #size-cells = <1>;
25 compatible = "mx25l3205d";
26 reg = <0 0>;
27 linux,modalias = "m25p80", "mx25l3205d";
28 spi-max-frequency = <10000000>;
29
30 partition@0 {
31 label = "u-boot";
32 reg = <0x0 0x30000>;
33 read-only;
34 };
35
36 partition@30000 {
37 label = "u-boot-env";
38 reg = <0x30000 0x10000>;
39 read-only;
40 };
41
42 factory: partition@40000 {
43 label = "factory";
44 reg = <0x40000 0x10000>;
45 read-only;
46 };
47
48 partition@50000 {
49 label = "firmware";
50 reg = <0x50000 0x3b0000>;
51 };
52 };
53 };
54 };
55
56 ethernet@10100000 {
57 status = "okay";
58 };
59
60 esw@10110000 {
61 status = "okay";
62 ralink,portmap = <0x3e>;
63 };
64
65 gpio-leds {
66 compatible = "gpio-leds";
67 3g {
68 label = "asus:blue:3g";
69 gpios = <&gpio0 9 1>;
70 };
71 3g2 {
72 label = "asus:red:3g";
73 gpios = <&gpio0 13 1>;
74 };
75 power {
76 label = "asus:blue:power";
77 gpios = <&gpio0 11 1>;
78 };
79 };
80
81 gpio-keys-polled {
82 compatible = "gpio-keys-polled";
83 #address-cells = <1>;
84 #size-cells = <0>;
85 poll-interval = <20>;
86 reset {
87 label = "reset";
88 gpios = <&gpio0 10 1>;
89 linux,code = <0x198>;
90 };
91 wps {
92 label = "wps";
93 gpios = <&gpio0 0 1>;
94 linux,code = <0x198>;
95 };
96 };
97
98 wmac@10180000 {
99 status = "okay";
100 };
101
102 otg@101c0000 {
103 status = "okay";
104 };
105 };