9f9d5b75926b0e91014af58f81197a7fb5e4f0a5
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / WMR-300.dts
1 /dts-v1/;
2
3 #include "mt7620n.dtsi"
4
5 / {
6 compatible = "buffalo,wmr-300", "ralink,mt7620n-soc";
7 model = "Buffalo WMR-300";
8
9 gpio-leds {
10 compatible = "gpio-leds";
11
12 aoss1 {
13 label = "wmr-300:red:aoss";
14 gpios = <&gpio2 1 1>;
15 };
16
17 aoss2 {
18 label = "wmr-300:green:aoss";
19 gpios = <&gpio2 2 1>;
20 };
21
22 power {
23 label = "wmr-300:green:status";
24 gpios = <&gpio2 4 1>;
25 };
26 };
27
28 gpio-keys-polled {
29 compatible = "gpio-keys-polled";
30 #address-cells = <1>;
31 #size-cells = <0>;
32 poll-interval = <20>;
33
34 reset {
35 label = "reset";
36 gpios = <&gpio0 1 1>;
37 linux,code = <0x198>;
38 };
39
40 aoss {
41 label = "aoss";
42 gpios = <&gpio0 2 1>;
43 linux,code = <0x211>;
44 };
45 };
46 };
47
48 &gpio2 {
49 status = "okay";
50 };
51
52 &spi0 {
53 status = "okay";
54
55 m25p80@0 {
56 #address-cells = <1>;
57 #size-cells = <1>;
58 compatible = "jedec,spi-nor";
59 reg = <0 0>;
60 linux,modalias = "m25p80", "en25q64";
61 spi-max-frequency = <10000000>;
62
63 partition@0 {
64 label = "u-boot";
65 reg = <0x0 0x30000>;
66 read-only;
67 };
68
69 partition@30000 {
70 label = "u-boot-env";
71 reg = <0x30000 0x10000>;
72 read-only;
73 };
74
75 factory: partition@40000 {
76 label = "factory";
77 reg = <0x40000 0x10000>;
78 read-only;
79 };
80
81 partition@50000 {
82 label = "firmware";
83 reg = <0x50000 0x7b0000>;
84 };
85 };
86 };
87
88 &ethernet {
89 mtd-mac-address = <&factory 0x4>;
90 mediatek,portmap = "wllll";
91 };
92
93 &wmac {
94 ralink,mtd-eeprom = <&factory 0>;
95 };
96
97 &pinctrl {
98 state_default: pinctrl0 {
99 default {
100 ralink,group = "i2c", "ephy";
101 ralink,function = "gpio";
102 };
103 };
104 };