b68f3ba3bfc6a19b1576caf8a50eb8ddc35e057e
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / WNCE2001.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 / {
6 compatible = "WNCE2001", "ralink,rt3052-soc";
7 model = "Netgear WNCE2001";
8
9 chosen {
10 bootargs = "console=ttyS0,115200";
11 };
12
13 gpio-leds {
14 compatible = "gpio-leds";
15
16 power-green {
17 label = "wnce2001:green:power";
18 gpios = <&gpio0 8 1>;
19 };
20
21 power-red {
22 label = "wnce2001:red:power";
23 gpios = <&gpio0 9 1>;
24 };
25
26 wlan-green {
27 label = "wnce2001:green:wlan";
28 gpios = <&gpio0 12 0>;
29 };
30
31 wlan-red {
32 label = "wnce2001:red:wlan";
33 gpios = <&gpio0 13 0>;
34 };
35 };
36
37 gpio-keys-polled {
38 compatible = "gpio-keys-polled";
39 #address-cells = <1>;
40 #size-cells = <0>;
41 poll-interval = <20>;
42
43 reset {
44 label = "reset";
45 gpios = <&gpio0 10 1>;
46 linux,code = <0x198>;
47 };
48
49 wps {
50 label = "wps";
51 gpios = <&gpio0 0 1>;
52 linux,code = <0x211>;
53 };
54
55 rt {
56 label = "rt";
57 gpios = <&gpio0 11 1>;
58 linux,code = <0x100>;
59 };
60
61 ap {
62 label = "ap";
63 gpios = <&gpio0 7 1>;
64 linux,code = <0x101>;
65 };
66 };
67 };
68
69 &spi0 {
70 status = "okay";
71
72 m25p80@0 {
73 #address-cells = <1>;
74 #size-cells = <1>;
75 compatible = "jedec,spi-nor";
76 reg = <0 0>;
77 linux,modalias = "m25p80", "mx25l3205d";
78 spi-max-frequency = <10000000>;
79
80 partition@0 {
81 label = "u-boot";
82 reg = <0x0 0x30000>;
83 read-only;
84 };
85
86 factory: partition@30000 {
87 label = "factory";
88 reg = <0x30000 0x10000>;
89 read-only;
90 };
91
92 partition@40000 {
93 label = "config";
94 reg = <0x40000 0x20000>;
95 read-only;
96 };
97
98 partition@60000 {
99 label = "language";
100 reg = <0x60000 0x30000>;
101 read-only;
102 };
103
104 partition@90000 {
105 label = "pot";
106 reg = <0x90000 0x10000>;
107 read-only;
108 };
109
110 partition@a0000 {
111 label = "checksum";
112 reg = <0xa0000 0x10000>;
113 };
114
115 partition@b0000 {
116 label = "firmware";
117 reg = <0xb0000 0x350000>;
118 };
119 };
120 };
121
122 &pinctrl {
123 state_default: pinctrl0 {
124 gpio {
125 ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
126 ralink,function = "gpio";
127 };
128 };
129 };
130
131 &ethernet {
132 mtd-mac-address = <&factory 0x28>;
133 };
134
135 &wmac {
136 ralink,mtd-eeprom = <&factory 0>;
137 };