target/linux/ramips/dts/WR6202.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "WR6202", "ralink,rt3052-soc";
   7         model = "AWB WR6202";
   8
   9         chosen {
  10                 bootargs = "console=ttyS0,115200";
  11         };
  12
  13         palmbus@10000000 {
  14                 sysc@0 {
  15                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  16                         ralink,uartmux = "gpio";
  17                         ralink,wdtmux = <1>;
  18                 };
  19
  20                 gpio0: gpio@600 {
  21                         status = "okay";
  22                 };
  23
  24         };
  25
  26         gpio-leds {
  27                 compatible = "gpio-leds";
  28                 wps {
  29                         label = "wr6202:blue:wps";
  30                         gpios = <&gpio0 14 1>;
  31                 };
  32                 3g {
  33                         label = "wr6202:blue:3g";
  34                         gpios = <&gpio0 13 1>;
  35                 };
  36         };
  37
  38         gpio-keys-polled {
  39                 compatible = "gpio-keys-polled";
  40                 #address-cells = <1>;
  41                 #size-cells = <0>;
  42                 poll-interval = <20>;
  43                 reset {
  44                         label = "reset";
  45                         gpios = <&gpio0 10 1>;
  46                         linux,code = <0x198>;
  47                 };
  48                 wps {
  49                         label = "wps";
  50                         gpios = <&gpio0 0 1>;
  51                         linux,code = <0x211>;
  52                 };
  53         };
  54
  55         cfi@1f000000 {
  56                 compatible = "cfi-flash";
  57                 reg = <0x1f000000 0x800000>;
  58
  59                 bank-width = <2>;
  60                 device-width = <2>;
  61                 #address-cells = <1>;
  62                 #size-cells = <1>;
  63
  64                 partition@0 {
  65                         label = "u-boot";
  66                         reg = <0x0 0x30000>;
  67                         read-only;
  68                 };
  69
  70                 partition@30000 {
  71                         label = "u-boot-env";
  72                         reg = <0x30000 0x10000>;
  73                         read-only;
  74                 };
  75
  76                 factory: partition@40000 {
  77                         label = "factory";
  78                         reg = <0x40000 0x10000>;
  79                         read-only;
  80                 };
  81
  82                 partition@50000 {
  83                         label = "firmware";
  84                         reg = <0x50000 0x7b0000>;
  85                 };
  86         };
  87
  88         ethernet@10100000 {
  89                 status = "okay";
  90         };
  91
  92         esw@10110000 {
  93                 status = "okay";
  94                 ralink,portmap = <0x3e>;
  95         };
  96
  97         wmac@10180000 {
  98                 status = "okay";
  99         };
 100
 101         otg@101c0000 {
 102                 status = "okay";
 103         };
 104
 105         gpio_export {
 106                 compatible = "gpio-export";
 107                 #size-cells = <0>;
 108
 109                 usb {
 110                         gpio-export,name = "usb";
 111                         gpio-export,output = <0>;
 112                         gpios = <&gpio0 11 0>;
 113                 };
 114         };
 115 };