target/linux/ramips/dts/WRTNODE.dts

   1 /dts-v1/;
   2
   3 #include "mt7620n.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6
   7 / {
   8         compatible = "wrtnode,wrtnode", "ralink,mt7620n-soc";
   9         model = "WRTNODE";
  10
  11         aliases {
  12                 led-boot = &led_indicator;
  13                 led-failsafe = &led_indicator;
  14                 led-running = &led_indicator;
  15                 led-upgrade = &led_indicator;
  16         };
  17
  18         leds {
  19                 compatible = "gpio-leds";
  20
  21                 led_indicator: indicator {
  22                         label = "wrtnode:blue:indicator";
  23                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  24                 };
  25         };
  26 };
  27
  28 &gpio1 {
  29         status = "okay";
  30 };
  31
  32 &gpio2 {
  33         status = "okay";
  34 };
  35
  36 &gpio3 {
  37         status = "okay";
  38 };
  39
  40 &spi0 {
  41         status = "okay";
  42
  43         m25p80@0 {
  44                 compatible = "jedec,spi-nor";
  45                 reg = <0>;
  46                 spi-max-frequency = <10000000>;
  47
  48                 partitions {
  49                         compatible = "fixed-partitions";
  50                         #address-cells = <1>;
  51                         #size-cells = <1>;
  52
  53                         partition@0 {
  54                                 label = "u-boot";
  55                                 reg = <0x0 0x30000>;
  56                                 read-only;
  57                         };
  58
  59                         partition@30000 {
  60                                 label = "u-boot-env";
  61                                 reg = <0x30000 0x10000>;
  62                                 read-only;
  63                         };
  64
  65                         factory: partition@40000 {
  66                                 label = "factory";
  67                                 reg = <0x40000 0x10000>;
  68                                 read-only;
  69                         };
  70
  71                         partition@50000 {
  72                                 compatible = "denx,uimage";
  73                                 label = "firmware";
  74                                 reg = <0x50000 0xfb0000>;
  75                         };
  76                 };
  77         };
  78 };
  79
  80 &ehci {
  81         status = "okay";
  82 };
  83
  84 &ohci {
  85         status = "okay";
  86 };
  87
  88 &ethernet {
  89         mtd-mac-address = <&factory 0x4>;
  90         mediatek,portmap = "wllll";
  91 };
  92
  93 &wmac {
  94         ralink,mtd-eeprom = <&factory 0>;
  95 };
  96
  97 &pinctrl {
  98         state_default: pinctrl0 {
  99                 default {
 100                         ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf", "spi refclk";
 101                         ralink,function = "gpio";
 102                 };
 103         };
 104 };