ramips: fix size-cells on spi nodes
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / WSR-1166.dts
1 /dts-v1/;
2
3 #include "mt7621.dtsi"
4
5 / {
6 compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
7 model = "Buffalo WSR-1166DHP";
8
9 memory@0 {
10 device_type = "memory";
11 reg = <0x0 0x8000000>;
12 };
13
14 chosen {
15 bootargs = "console=ttyS0,57600";
16 };
17
18 gpio-leds {
19 compatible = "gpio-leds";
20
21 internet_g {
22 label = "wsr-1166:green:internet";
23 gpios = <&gpio1 9 1>;
24 };
25
26 router_g {
27 label = "wsr-1166:green:router";
28 gpios = <&gpio1 10 1>;
29 };
30
31 router_o {
32 label = "wsr-1166:orange:router";
33 gpios = <&gpio1 11 1>;
34 };
35
36 internet_o {
37 label = "wsr-1166:orange:internet";
38 gpios = <&gpio1 12 1>;
39 };
40
41 wifi_o {
42 label = "wsr-1166:orange:wifi";
43 gpios = <&gpio1 13 1>;
44 };
45
46 power {
47 label = "wsr-1166:green:power";
48 gpios = <&gpio1 14 1>;
49 };
50
51 diag {
52 label = "wsr-1166:orange:diag";
53 gpios = <&gpio1 15 1>;
54 };
55
56 wifi_g {
57 label = "wsr-1166:green:wifi";
58 gpios = <&gpio1 16 1>;
59 };
60 };
61
62 gpio-keys-polled {
63 compatible = "gpio-keys-polled";
64 #address-cells = <1>;
65 #size-cells = <0>;
66 poll-interval = <20>;
67
68 power {
69 label = "power";
70 gpios = <&gpio0 18 1>;
71 linux,code = <0x74>;
72 };
73
74 reset {
75 label = "reset";
76 gpios = <&gpio0 3 1>;
77 linux,code = <0x198>;
78 };
79
80 aoss {
81 label = "aoss";
82 gpios = <&gpio0 6 1>;
83 linux,code = <0x211>;
84 };
85
86 auto {
87 label = "mode";
88 gpios = <&gpio0 7 0>;
89 linux,code = <0x100>;
90 linux,input-type = <5>; /* EV_SW */
91 };
92
93 ap {
94 label = "ap";
95 gpios = <&gpio0 10 0>;
96 linux,code = <0x100>;
97 linux,input-type = <5>; /* EV_SW */
98 };
99
100 router {
101 label = "router";
102 gpios = <&gpio0 12 0>;
103 linux,code = <0x100>;
104 linux,input-type = <5>; /* EV_SW */
105 };
106 };
107
108 gpio_poweroff {
109 compatible = "gpio-poweroff";
110 gpios = <&gpio0 0 1>;
111 };
112 };
113
114 &spi0 {
115 status = "okay";
116
117 m25p80@0 {
118 #address-cells = <1>;
119 #size-cells = <1>;
120 compatible = "jedec,spi-nor";
121 reg = <0>;
122 linux,modalias = "m25p80";
123 spi-max-frequency = <10000000>;
124
125 partition@0 {
126 label = "u-boot";
127 reg = <0x0 0x30000>;
128 read-only;
129 };
130
131 partition@30000 {
132 label = "u-boot-env";
133 reg = <0x30000 0x10000>;
134 read-only;
135 };
136
137 factory: partition@40000 {
138 label = "factory";
139 reg = <0x40000 0x10000>;
140 read-only;
141 };
142
143 partition@50000 {
144 label = "firmware";
145 reg = <0x50000 0xf90000>;
146 };
147
148 partition@fe0000 {
149 label = "board_data";
150 reg = <0xfe0000 0x20000>;
151 };
152 };
153 };
154
155 &pinctrl {
156 state_default: pinctrl0 {
157 gpio {
158 ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
159 ralink,function = "gpio";
160 };
161 };
162 };
163
164 &pcie {
165 status = "okay";
166
167 pcie0 {
168 mt76@0,0 {
169 reg = <0x0000 0 0 0 0>;
170 device_type = "pci";
171 mediatek,mtd-eeprom = <&factory 0x8000>;
172 mediatek,2ghz = <0>;
173 };
174 };
175
176 pcie1 {
177 mt76@1,0 {
178 reg = <0x0000 0 0 0 0>;
179 device_type = "pci";
180 mediatek,mtd-eeprom = <&factory 0x0000>;
181 mediatek,5ghz = <0>;
182 };
183 };
184 };