1f97f106a4bfa1d852e7554e1d6bfe490867a72b
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / X5.dts
1 /dts-v1/;
2
3 #include "rt5350.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "poray,x5", "ralink,rt5350-soc";
10 model = "Poray X5";
11
12 aliases {
13 led-boot = &led_power;
14 led-failsafe = &led_power;
15 led-running = &led_power;
16 led-upgrade = &led_power;
17 };
18
19 gpio-leds {
20 compatible = "gpio-leds";
21
22 led_power: power {
23 label = "x5:green:power";
24 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
25 };
26
27 20 {
28 label = "x5:green:20";
29 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
30 };
31
32 50 {
33 label = "x5:green:50";
34 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
35 };
36
37 80 {
38 label = "x5:green:80";
39 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
40 };
41 };
42
43 keys {
44 compatible = "gpio-keys-polled";
45 poll-interval = <20>;
46
47 bat {
48 label = "bat";
49 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
50 linux,code = <KEY_WPS_BUTTON>;
51 };
52
53 reset {
54 label = "reset";
55 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
56 linux,code = <KEY_RESTART>;
57 };
58
59 mode {
60 label = "mode";
61 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
62 linux,code = <BTN_0>;
63 linux,input-type = <EV_SW>;
64 };
65 };
66
67 gpio_export {
68 compatible = "gpio-export";
69 #size-cells = <0>;
70
71 usb-mode {
72 gpio-export,name = "usb-mode";
73 gpio-export,output = <0>;
74 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
75 };
76 };
77 };
78
79 &spi0 {
80 status = "okay";
81
82 m25p80@0 {
83 compatible = "jedec,spi-nor";
84 reg = <0>;
85 spi-max-frequency = <10000000>;
86
87 partitions {
88 compatible = "fixed-partitions";
89 #address-cells = <1>;
90 #size-cells = <1>;
91
92 partition@0 {
93 label = "u-boot";
94 reg = <0x0 0x30000>;
95 read-only;
96 };
97
98 partition@30000 {
99 label = "u-boot-env";
100 reg = <0x30000 0x10000>;
101 read-only;
102 };
103
104 factory: partition@40000 {
105 label = "factory";
106 reg = <0x40000 0x10000>;
107 read-only;
108 };
109
110 partition@50000 {
111 compatible = "denx,uimage";
112 label = "firmware";
113 reg = <0x50000 0x7b0000>;
114 };
115 };
116 };
117 };
118
119 &pinctrl {
120 state_default: pinctrl0 {
121 gpio {
122 ralink,group = "i2c", "jtag", "uartf";
123 ralink,function = "gpio";
124 };
125 };
126 };
127
128 &ethernet {
129 mtd-mac-address = <&factory 0x4>;
130 };
131
132 &esw {
133 mediatek,portmap = <0x2f>;
134 mediatek,led_polarity = <1>;
135 };
136
137 &wmac {
138 ralink,mtd-eeprom = <&factory 0>;
139 ralink,led-polarity = <1>;
140 };
141
142 &ehci {
143 status = "okay";
144 };
145
146 &ohci {
147 status = "okay";
148 };