26d3cd7ca3f09f26377416a4fdd77434fcc4b23e
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / X5.dts
1 /dts-v1/;
2
3 #include "rt5350.dtsi"
4
5 / {
6 compatible = "X5", "ralink,rt5350-soc";
7 model = "Poray X5";
8
9 gpio-leds {
10 compatible = "gpio-leds";
11
12 power {
13 label = "x5:green:power";
14 gpios = <&gpio0 13 1>;
15 };
16
17 20 {
18 label = "x5:green:20";
19 gpios = <&gpio0 12 1>;
20 };
21
22 50 {
23 label = "x5:green:50";
24 gpios = <&gpio0 11 1>;
25 };
26
27 80 {
28 label = "x5:green:80";
29 gpios = <&gpio0 7 1>;
30 };
31 };
32
33 gpio-keys-polled {
34 compatible = "gpio-keys-polled";
35 #address-cells = <1>;
36 #size-cells = <0>;
37 poll-interval = <20>;
38
39 bat {
40 label = "bat";
41 gpios = <&gpio0 9 1>;
42 linux,code = <0x211>;
43 };
44
45 reset {
46 label = "reset";
47 gpios = <&gpio0 10 1>;
48 linux,code = <0x198>;
49 };
50
51 mode {
52 label = "mode";
53 gpios = <&gpio0 14 1>;
54 linux,code = <0x100>;
55 linux,input-type = <5>;
56 };
57 };
58
59 gpio_export {
60 compatible = "gpio-export";
61 #size-cells = <0>;
62
63 usb-mode {
64 gpio-export,name = "usb-mode";
65 gpio-export,output = <0>;
66 gpios = <&gpio0 18 0>;
67 };
68 };
69 };
70
71 &spi0 {
72 status = "okay";
73
74 m25p80@0 {
75 #address-cells = <1>;
76 #size-cells = <1>;
77 compatible = "jedec,spi-nor";
78 reg = <0 0>;
79 linux,modalias = "m25p80", "gd25q64";
80 spi-max-frequency = <10000000>;
81
82 partition@0 {
83 label = "u-boot";
84 reg = <0x0 0x30000>;
85 read-only;
86 };
87
88 partition@30000 {
89 label = "u-boot-env";
90 reg = <0x30000 0x10000>;
91 read-only;
92 };
93
94 factory: partition@40000 {
95 label = "factory";
96 reg = <0x40000 0x10000>;
97 read-only;
98 };
99
100 partition@50000 {
101 label = "firmware";
102 reg = <0x50000 0x7b0000>;
103 };
104 };
105 };
106
107 &pinctrl {
108 state_default: pinctrl0 {
109 gpio {
110 ralink,group = "i2c", "jtag", "uartf";
111 ralink,function = "gpio";
112 };
113 };
114 };
115
116 &ethernet {
117 mtd-mac-address = <&factory 0x4>;
118 };
119
120 &esw {
121 mediatek,portmap = <0x2f>;
122 mediatek,led_polarity = <1>;
123 };
124
125 &wmac {
126 ralink,mtd-eeprom = <&factory 0>;
127 ralink,led-polarity = <1>;
128 };
129
130 &ehci {
131 status = "okay";
132 };
133
134 &ohci {
135 status = "okay";
136 };