target/linux/ramips/dts/X5.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 / {
   6         compatible = "X5", "ralink,rt5350-soc";
   7         model = "Poray X5";
   8
   9         gpio-leds {
  10                 compatible = "gpio-leds";
  11
  12                 power {
  13                         label = "x5:green:power";
  14                         gpios = <&gpio0 13 1>;
  15                 };
  16
  17                 20 {
  18                         label = "x5:green:20";
  19                         gpios = <&gpio0 12 1>;
  20                 };
  21
  22                 50 {
  23                         label = "x5:green:50";
  24                         gpios = <&gpio0 11 1>;
  25                 };
  26
  27                 80 {
  28                         label = "x5:green:80";
  29                         gpios = <&gpio0 7 1>;
  30                 };
  31         };
  32
  33         gpio-keys-polled {
  34                 compatible = "gpio-keys-polled";
  35                 #address-cells = <1>;
  36                 #size-cells = <0>;
  37                 poll-interval = <20>;
  38
  39                 bat {
  40                         label = "bat";
  41                         gpios = <&gpio0 9 1>;
  42                         linux,code = <0x211>;
  43                 };
  44
  45                 reset {
  46                         label = "reset";
  47                         gpios = <&gpio0 10 1>;
  48                         linux,code = <0x198>;
  49                 };
  50
  51                 mode {
  52                         label = "mode";
  53                         gpios = <&gpio0 14 1>;
  54                         linux,code = <0x100>;
  55                         linux,input-type = <5>;
  56                 };
  57         };
  58
  59         gpio_export {
  60                 compatible = "gpio-export";
  61                 #size-cells = <0>;
  62
  63                 usb-mode {
  64                         gpio-export,name = "usb-mode";
  65                         gpio-export,output = <0>;
  66                         gpios = <&gpio0 18 0>;
  67                 };
  68         };
  69 };
  70
  71 &spi0 {
  72         status = "okay";
  73
  74         m25p80@0 {
  75                 #address-cells = <1>;
  76                 #size-cells = <1>;
  77                 compatible = "jedec,spi-nor";
  78                 reg = <0>;
  79                 linux,modalias = "m25p80", "gd25q64";
  80                 spi-max-frequency = <10000000>;
  81
  82                 partition@0 {
  83                         label = "u-boot";
  84                         reg = <0x0 0x30000>;
  85                         read-only;
  86                 };
  87
  88                 partition@30000 {
  89                         label = "u-boot-env";
  90                         reg = <0x30000 0x10000>;
  91                         read-only;
  92                 };
  93
  94                 factory: partition@40000 {
  95                         label = "factory";
  96                         reg = <0x40000 0x10000>;
  97                         read-only;
  98                 };
  99
 100                 partition@50000 {
 101                         label = "firmware";
 102                         reg = <0x50000 0x7b0000>;
 103                 };
 104         };
 105 };
 106
 107 &pinctrl {
 108         state_default: pinctrl0 {
 109                 gpio {
 110                         ralink,group = "i2c", "jtag", "uartf";
 111                         ralink,function = "gpio";
 112                 };
 113         };
 114 };
 115
 116 &ethernet {
 117         mtd-mac-address = <&factory 0x4>;
 118 };
 119
 120 &esw {
 121         mediatek,portmap = <0x2f>;
 122         mediatek,led_polarity = <1>;
 123 };
 124
 125 &wmac {
 126         ralink,mtd-eeprom = <&factory 0>;
 127         ralink,led-polarity = <1>;
 128 };
 129
 130 &ehci {
 131         status = "okay";
 132 };
 133
 134 &ohci {
 135         status = "okay";
 136 };