target/linux/ramips/dts/Y1S.dts

   1 /dts-v1/;
   2
   3 #include "Y1.dtsi"
   4
   5 / {
   6         compatible = "lenovo,newifi-y1s", "lenovo,newifi-y1", "ralink,mt7620a-soc";
   7         model = "Lenovo Y1S";
   8
   9         aliases {
  10                 led-boot = &led_power_blue;
  11                 led-failsafe = &led_power_blue;
  12                 led-running = &led_power_blue;
  13                 led-upgrade = &led_power_blue;
  14         };
  15
  16         gpio_export {
  17                 compatible = "gpio-export";
  18                 #size-cells = <0>;
  19
  20                 usb0 {
  21                         gpio-export,name = "usb0";
  22                         gpio-export,output = <1>;
  23                         gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>;
  24                 };
  25                 usb1 {
  26                         gpio-export,name = "usb1";
  27                         gpio-export,output = <1>;
  28                         gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
  29                 };
  30                 usb2 {
  31                         gpio-export,name = "usb2";
  32                         gpio-export,output = <1>;
  33                         gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
  34                 };
  35         };
  36
  37         gpio-leds {
  38                 compatible = "gpio-leds";
  39
  40                 power1 {
  41                         label = "y1s:yellow:power";
  42                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 led_power_blue: power2 {
  46                         label = "y1s:blue:power";
  47                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 wlan1 {
  51                         label = "y1s:yellow:wifi";
  52                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 wlan2 {
  56                         label = "y1s:blue:wifi";
  57                         gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
  58                 };
  59
  60                 usb1 {
  61                         label = "y1s:yellow:usb";
  62                         gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
  63                 };
  64
  65                 usb2 {
  66                         label = "y1s:blue:usb";
  67                         gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
  68                         trigger-sources = <&ohci_port1>, <&ehci_port1>;
  69                         linux,default-trigger = "usbport";
  70                 };
  71
  72                 internet {
  73                         label = "y1s:blue:internet";
  74                         gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
  75                 };
  76         };
  77 };
  78
  79 &ethernet {
  80         status = "okay";
  81         mtd-mac-address = <&factory 0x4>;
  82         pinctrl-names = "default";
  83         pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
  84         mediatek,portmap = "wllll";
  85
  86         port@4 {
  87                 status = "okay";
  88                 phy-handle = <&phy4>;
  89                 phy-mode = "rgmii";
  90         };
  91
  92         port@5 {
  93                 status = "okay";
  94                 phy-handle = <&phy5>;
  95                 phy-mode = "rgmii";
  96         };
  97
  98         mdio-bus {
  99                 status = "okay";
 100
 101                 phy4: ethernet-phy@4 {
 102                         reg = <4>;
 103                         phy-mode = "rgmii";
 104                 };
 105
 106                 phy5: ethernet-phy@5 {
 107                         reg = <5>;
 108                         phy-mode = "rgmii";
 109                 };
 110         };
 111 };
 112
 113 &gsw {
 114         mediatek,port4 = "gmac";
 115 };