edb6da08abf121638a5e16d3dd836558a12fb447
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / ZBT-APE522II.dts
1 /dts-v1/;
2
3 #include "mt7620a.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "zbtlink,zbt-ape522ii", "ralink,mt7620a-soc";
10 model = "ZBT-APE522II";
11
12 chosen {
13 bootargs = "console=ttyS0,115200";
14 };
15
16 gpio-leds {
17 compatible = "gpio-leds";
18
19 sys1 {
20 label = "zbt-ape522ii:green:sys1";
21 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
22 };
23
24 sys2 {
25 label = "zbt-ape522ii:green:sys2";
26 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
27 };
28
29 sys3 {
30 label = "zbt-ape522ii:green:sys3";
31 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
32 };
33
34 sys4 {
35 label = "zbt-ape522ii:green:sys4";
36 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
37 };
38
39 wlan2g4 {
40 label = "zbt-ape522ii:green:wlan2g4";
41 gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
42 };
43 };
44
45 keys {
46 compatible = "gpio-keys-polled";
47 poll-interval = <20>;
48
49 reset {
50 label = "reset";
51 gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
52 linux,code = <KEY_RESTART>;
53 };
54 };
55 };
56
57 &gpio0 {
58 status = "okay";
59 };
60
61 &gpio1 {
62 status = "okay";
63 };
64
65 &gpio2 {
66 status = "okay";
67 };
68
69 &gpio3 {
70 status = "okay";
71 };
72
73 &spi0 {
74 status = "okay";
75
76 m25p80@0 {
77 compatible = "jedec,spi-nor";
78 reg = <0>;
79 spi-max-frequency = <10000000>;
80
81 partitions {
82 compatible = "fixed-partitions";
83 #address-cells = <1>;
84 #size-cells = <1>;
85
86 partition@0 {
87 label = "u-boot";
88 reg = <0x0 0x30000>;
89 };
90
91 partition@30000 {
92 label = "u-boot-env";
93 reg = <0x30000 0x10000>;
94 read-only;
95 };
96
97 factory: partition@40000 {
98 label = "factory";
99 reg = <0x40000 0x10000>;
100 read-only;
101 };
102
103 partition@50000 {
104 compatible = "denx,uimage";
105 label = "firmware";
106 reg = <0x50000 0xf80000>;
107 };
108 };
109 };
110 };
111
112 &ethernet {
113 pinctrl-names = "default";
114 pinctrl-0 = <&ephy_pins>;
115 mtd-mac-address = <&factory 0x4>;
116 mediatek,portmap = "wllll";
117 };
118
119 &wmac {
120 ralink,mtd-eeprom = <&factory 0>;
121 pinctrl-names = "default";
122 pinctrl-0 = <&pa_pins>;
123 };
124
125 &pcie {
126 status = "okay";
127 };
128
129 &pcie0 {
130 mt76@0,0 {
131 reg = <0x0000 0 0 0 0>;
132 mediatek,mtd-eeprom = <&factory 0x8000>;
133 ieee80211-freq-limit = <5000000 6000000>;
134 };
135 };
136
137 &pinctrl {
138 state_default: pinctrl0 {
139 gpio {
140 ralink,group = "wled", "i2c", "uartf", "wdt";
141 ralink,function = "gpio";
142 };
143 };
144 };