target/linux/ramips/dts/ZBT-WA05.dts

   1 /dts-v1/;
   2
   3 #include "mt7620n.dtsi"
   4
   5 / {
   6         compatible = "zbtlink,zbt-wa05", "ralink,mt7620n-soc";
   7         model = "Zbtlink ZBT-WA05";
   8
   9         chosen {
  10                 bootargs = "console=ttyS0,115200";
  11         };
  12
  13         palmbus@10000000 {
  14                 gpio1: gpio@638 {
  15                         status = "okay";
  16                 };
  17
  18                 gpio2: gpio@660 {
  19                         status = "okay";
  20                 };
  21
  22                 gpio3: gpio@688 {
  23                         status = "okay";
  24                 };
  25
  26                 spi@b00 {
  27                         status = "okay";
  28
  29                         en25q64@0 {
  30                                 #address-cells = <1>;
  31                                 #size-cells = <1>;
  32                                 compatible = "jedec,spi-nor";
  33                                 reg = <0 0>;
  34                                 linux,modalias = "m25p80";
  35                                 spi-max-frequency = <10000000>;
  36
  37                                 partition@0 {
  38                                         label = "u-boot";
  39                                         reg = <0x0 0x30000>;
  40                                         read-only;
  41                                 };
  42
  43                                 partition@30000 {
  44                                         label = "u-boot-env";
  45                                         reg = <0x30000 0x10000>;
  46                                         read-only;
  47                                 };
  48
  49                                 factory: partition@40000 {
  50                                         label = "factory";
  51                                         reg = <0x40000 0x10000>;
  52                                         read-only;
  53                                 };
  54
  55                                 partition@50000 {
  56                                         label = "firmware";
  57                                         reg = <0x50000 0x760000>;
  58                                 };
  59                         };
  60                 };
  61         };
  62
  63         ehci@101c0000 {
  64                 status = "okay";
  65         };
  66
  67         ohci@101c1000 {
  68                 status = "okay";
  69         };
  70
  71         ethernet@10100000 {
  72                 mtd-mac-address = <&factory 0x4>;
  73                 mediatek,portmap = "wllll";
  74         };
  75
  76         wmac@10180000 {
  77                 ralink,mtd-eeprom = <&factory 0>;
  78         };
  79
  80         pinctrl {
  81                 state_default: pinctrl0 {
  82                         default {
  83                                 ralink,group = "i2c", "spi refclk", "wled";
  84                                 ralink,function = "gpio";
  85                         };
  86                 };
  87         };
  88
  89         gpio-leds {
  90                 compatible = "gpio-leds";
  91
  92                 power {
  93                         label = "zbt-wa05:blue:power";
  94                         gpios = <&gpio1 14 1>;
  95                 };
  96
  97                 usb {
  98                         label = "zbt-wa05:blue:usb";
  99                         gpios = <&gpio1 15 0>;
 100                 };
 101
 102                 air {
 103                         label = "zbt-wa05:blue:air";
 104                         gpios = <&gpio3 0 1>;
 105                 };
 106         };
 107
 108         gpio-keys-polled {
 109                 compatible = "gpio-keys-polled";
 110                 #address-cells = <1>;
 111                 #size-cells = <0>;
 112                 poll-interval = <20>;
 113
 114                 reset {
 115                         label = "reset";
 116                         gpios = <&gpio0 1 1>;
 117                         linux,code = <0x198>;
 118                 };
 119         };
 120 };