target/linux/ramips/dts/ZBT-WA05.dts

   1 /dts-v1/;
   2
   3 #include "mt7620n.dtsi"
   4
   5 / {
   6         compatible = "zbtlink,zbt-wa05", "ralink,mt7620n-soc";
   7         model = "Zbtlink ZBT-WA05";
   8
   9         chosen {
  10                 bootargs = "console=ttyS0,115200";
  11         };
  12
  13         gpio-leds {
  14                 compatible = "gpio-leds";
  15
  16                 power {
  17                         label = "zbt-wa05:blue:power";
  18                         gpios = <&gpio1 14 1>;
  19                 };
  20
  21                 usb {
  22                         label = "zbt-wa05:blue:usb";
  23                         gpios = <&gpio1 15 0>;
  24                 };
  25
  26                 air {
  27                         label = "zbt-wa05:blue:air";
  28                         gpios = <&gpio3 0 1>;
  29                 };
  30         };
  31
  32         gpio-keys-polled {
  33                 compatible = "gpio-keys-polled";
  34                 #address-cells = <1>;
  35                 #size-cells = <0>;
  36                 poll-interval = <20>;
  37
  38                 reset {
  39                         label = "reset";
  40                         gpios = <&gpio0 1 1>;
  41                         linux,code = <0x198>;
  42                 };
  43         };
  44 };
  45
  46 &gpio1 {
  47         status = "okay";
  48 };
  49
  50 &gpio2 {
  51         status = "okay";
  52 };
  53
  54 &gpio3 {
  55         status = "okay";
  56 };
  57
  58 &spi0 {
  59         status = "okay";
  60
  61         en25q64@0 {
  62                 #address-cells = <1>;
  63                 #size-cells = <1>;
  64                 compatible = "jedec,spi-nor";
  65                 reg = <0>;
  66                 linux,modalias = "m25p80";
  67                 spi-max-frequency = <10000000>;
  68
  69                 partition@0 {
  70                         label = "u-boot";
  71                         reg = <0x0 0x30000>;
  72                         read-only;
  73                 };
  74
  75                 partition@30000 {
  76                         label = "u-boot-env";
  77                         reg = <0x30000 0x10000>;
  78                         read-only;
  79                 };
  80
  81                 factory: partition@40000 {
  82                         label = "factory";
  83                         reg = <0x40000 0x10000>;
  84                         read-only;
  85                 };
  86
  87                 partition@50000 {
  88                         label = "firmware";
  89                         reg = <0x50000 0x760000>;
  90                 };
  91         };
  92 };
  93
  94 &ehci {
  95         status = "okay";
  96 };
  97
  98 &ohci {
  99         status = "okay";
 100 };
 101
 102 &ethernet {
 103         mtd-mac-address = <&factory 0x4>;
 104         mediatek,portmap = "wllll";
 105 };
 106
 107 &wmac {
 108         ralink,mtd-eeprom = <&factory 0>;
 109 };
 110
 111 &pinctrl {
 112         state_default: pinctrl0 {
 113                 default {
 114                         ralink,group = "i2c", "spi refclk", "wled";
 115                         ralink,function = "gpio";
 116                 };
 117         };
 118 };