target/linux/ramips/dts/mt7620a_dlink_dir-510l.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7620a.dtsi"
   5
   6 #include <dt-bindings/input/input.h>
   7 #include <dt-bindings/gpio/gpio.h>
   8
   9 / {
  10         compatible = "dlink,dir-510l", "ralink,mt7620a-soc";
  11         model = "D-Link DIR-510L";
  12
  13         aliases {
  14                 led-boot = &led_status;
  15                 led-failsafe = &led_status;
  16                 led-running = &led_status;
  17                 led-upgrade = &led_status;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS1,57600";
  22         };
  23
  24         keys {
  25                 compatible = "gpio-keys";
  26
  27                 reset {
  28                         label = "reset";
  29                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  30                         linux,code = <KEY_RESTART>;
  31                 };
  32
  33                 wps {
  34                         label = "wps";
  35                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  36                         linux,code = <KEY_WPS_BUTTON>;
  37                 };
  38         };
  39
  40         leds {
  41                 compatible = "gpio-leds";
  42
  43                 led_status: status {
  44                         label = "dir-510l:green:status";
  45                         gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
  46                 };
  47
  48                 status-red {
  49                         label = "dir-510l:red:status";
  50                         gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
  51                 };
  52         };
  53 };
  54
  55 &ethernet {
  56         mediatek,portmap = "llllw";
  57 };
  58
  59 &uart {
  60         status = "okay";
  61 };
  62
  63 &gpio0 {
  64         status = "okay";
  65 };
  66
  67 &spi0 {
  68         status = "okay";
  69
  70         flash@0 {
  71                 compatible = "jedec,spi-nor";
  72                 reg = <0>;
  73                 spi-max-frequency = <50000000>;
  74
  75                 partitions {
  76                         compatible = "fixed-partitions";
  77                         #address-cells = <1>;
  78                         #size-cells = <1>;
  79
  80                         partition@0 {
  81                                 label = "jboot";
  82                                 reg = <0x0 0x10000>;
  83                                 read-only;
  84                         };
  85
  86                         partition@10000 {
  87                                 label = "recovery";
  88                                 reg = <0x10000 0x200000>;
  89                                 read-only;
  90                         };
  91
  92                         partition@210000 {
  93                                 compatible = "amit,jimage";
  94                                 label = "firmware";
  95                                 reg = <0x210000 0xde0000>;
  96                         };
  97
  98                         config: partition@ff0000 {
  99                                 label = "config";
 100                                 reg = <0xff0000 0x10000>;
 101                                 read-only;
 102                         };
 103                 };
 104         };
 105 };
 106
 107 &ehci {
 108         status = "okay";
 109 };
 110
 111 &ohci {
 112         status = "okay";
 113 };
 114
 115 &pcie {
 116         status = "okay";
 117 };
 118
 119 &pcie0 {
 120         mt76x0e@0,0 {
 121                 reg = <0x0000 0 0 0 0>;
 122                 mtd-mac-address = <&config 0xe490>;
 123                 mtd-mac-address-increment = <(2)>;
 124                 mediatek,mtd-eeprom = <&config 0xe05d>;
 125         };
 126 };
 127
 128 &gsw {
 129         mediatek,port4 = "ephy";
 130 };
 131
 132 &state_default {
 133         default {
 134                 groups = "i2c", "uartf";
 135                 function = "gpio";
 136         };
 137 };