target/linux/ramips/dts/mt7628an_buffalo_wcr-1166ds.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "buffalo,wcr-1166ds", "mediatek,mt7628an-soc";
  10         model = "Buffalo WCR-1166DS";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         keys {
  20                 compatible = "gpio-keys";
  21
  22                 aoss {
  23                         label = "aoss";
  24                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  25                         linux,code = <KEY_WPS_BUTTON>;
  26                 };
  27
  28                 ap {
  29                         label = "ap";
  30                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  31                         linux,code = <BTN_0>;
  32                         linux,input-type = <EV_SW>;
  33                 };
  34
  35                 reset {
  36                         label = "reset";
  37                         gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
  38                         linux,code = <KEY_RESTART>;
  39                 };
  40         };
  41
  42         leds {
  43                 compatible = "gpio-leds";
  44
  45                 router_o {
  46                         label = "wcr-1166ds:orange:router";
  47                         gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 router_g {
  51                         label = "wcr-1166ds:green:router";
  52                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 internet_o {
  56                         label = "wcr-1166ds:orange:internet";
  57                         gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
  58                 };
  59
  60                 internet_g {
  61                         label = "wcr-1166ds:green:internet";
  62                         gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
  63                 };
  64
  65                 wireless_o {
  66                         label = "wcr-1166ds:orange:wireless";
  67                         gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
  68                 };
  69
  70                 wireless_g {
  71                         label = "wcr-1166ds:green:wireless";
  72                         gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
  73                 };
  74
  75                 diag {
  76                         label = "wcr-1166ds:orange:diag";
  77                         gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
  78                 };
  79
  80                 led_power: power {
  81                         label = "wcr-1166ds:green:power";
  82                         gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
  83                 };
  84         };
  85 };
  86
  87 &ehci {
  88         status = "disabled";
  89 };
  90
  91 &esw {
  92         mediatek,portmap = <0x2f>;
  93         mediatek,portdisable = <0x27>;
  94 };
  95
  96 &ohci {
  97         status = "disabled";
  98 };
  99
 100 &pcie {
 101         status = "okay";
 102 };
 103
 104 &pcie0 {
 105         mt76@0,0 {
 106                 reg = <0x0000 0 0 0 0>;
 107                 mediatek,mtd-eeprom = <&factory 0x8000>;
 108                 ieee80211-freq-limit = <5000000 6000000>;
 109         };
 110 };
 111
 112 &state_default {
 113         gpio {
 114                 groups = "uart1", "wled_an", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt", "refclk", "gpio", "i2s";
 115                 function = "gpio";
 116         };
 117 };
 118
 119 &spi0 {
 120         status = "okay";
 121
 122         m25p80@0 {
 123                 compatible = "jedec,spi-nor";
 124                 reg = <0>;
 125                 spi-max-frequency = <10000000>;
 126
 127                 partitions {
 128                         compatible = "fixed-partitions";
 129                         #address-cells = <1>;
 130                         #size-cells = <1>;
 131
 132                         partition@0 {
 133                                 label = "u-boot";
 134                                 reg = <0x0 0x30000>;
 135                                 read-only;
 136                         };
 137
 138                         partition@30000 {
 139                                 label = "u-boot-env";
 140                                 reg = <0x30000 0x10000>;
 141                                 read-only;
 142                         };
 143
 144                         factory: partition@40000 {
 145                                 label = "factory";
 146                                 reg = <0x40000 0x10000>;
 147                                 read-only;
 148                         };
 149
 150                         partition@50000 {
 151                                 compatible = "openwrt,trx";
 152                                 label = "firmware";
 153                                 reg = <0x50000 0x7c0000>;
 154                         };
 155
 156                         partition@810000 {
 157                                 label = "firmware2";
 158                                 reg = <0x810000 0x7c0000>;
 159                         };
 160
 161                         partition@fd0000 {
 162                                 label = "glbcfg";
 163                                 reg = <0xfd0000 0x10000>;
 164                                 read-only;
 165                         };
 166
 167                         partition@fe0000 {
 168                                 label = "board_data";
 169                                 reg = <0xfe0000 0x10000>;
 170                                 read-only;
 171                         };
 172                 };
 173         };
 174 };
 175
 176 &wmac {
 177         status = "okay";
 178 };