target/linux/ramips/dts/mt7628an_tplink_tl-wr840n-v5.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "tplink,tl-wr840n-v5", "mediatek,mt7628an-soc";
  10         model = "TP-Link TL-WR840N v5";
  11
  12         aliases {
  13                 led-boot = &led_power_green;
  14                 led-failsafe = &led_power_green;
  15                 led-running = &led_power_green;
  16                 led-upgrade = &led_power_green;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,115200";
  21         };
  22
  23         keys {
  24                 compatible = "gpio-keys";
  25
  26                 reset {
  27                         label = "reset";
  28                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
  29                         linux,code = <KEY_RESTART>;
  30                 };
  31         };
  32
  33         /* LED used is dual-color,dual lead LED */
  34         leds {
  35                 compatible = "gpio-leds";
  36
  37                 led_power_green: power {
  38                         label = "tl-wr840n-v5:green:power";
  39                         gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
  40                 };
  41
  42                 orange {
  43                         label = "tl-wr840n-v5:orange:power";
  44                         gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
  45                 };
  46         };
  47 };
  48
  49 &spi0 {
  50         status = "okay";
  51
  52         m25p80@0 {
  53                 compatible = "jedec,spi-nor";
  54                 reg = <0>;
  55                 spi-max-frequency = <10000000>;
  56
  57                 partitions {
  58                         compatible = "fixed-partitions";
  59                         #address-cells = <1>;
  60                         #size-cells = <1>;
  61
  62                         partition@0 {
  63                                 label = "boot";
  64                                 reg = <0x0 0x20000>;
  65                                 read-only;
  66                         };
  67
  68                         partition@20000 {
  69                                 compatible = "tplink,firmware";
  70                                 label = "firmware";
  71                                 reg = <0x20000 0x3d0000>;
  72                         };
  73
  74                         factory: partition@3f0000 {
  75                                 label = "factory";
  76                                 reg = <0x3f0000 0x10000>;
  77                                 read-only;
  78                         };
  79                 };
  80         };
  81 };
  82
  83 &ehci {
  84         status = "disabled";
  85 };
  86
  87 &ohci {
  88         status = "disabled";
  89 };
  90
  91 &wmac {
  92         status = "okay";
  93         mtd-mac-address = <&factory 0xf100>;
  94 };
  95
  96 &ethernet {
  97         mtd-mac-address = <&factory 0xf100>;
  98 };
  99
 100 &esw {
 101         mediatek,portmap = <0x3e>;
 102 };
 103
 104 &state_default {
 105         gpio {
 106                 groups = "p0led_an", "p2led_an", "perst";
 107                 function = "gpio";
 108         };
 109 };