target/linux/ramips/dts/mt7628an_vocore_vocore2-lite.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an_vocore_vocore2.dtsi"
   4
   5 / {
   6         compatible = "vocore,vocore2-lite", "vocore,vocore2", "mediatek,mt7628an-soc";
   7         model = "VoCore2-Lite";
   8
   9         aliases {
  10                 led-boot = &led_status;
  11                 led-failsafe = &led_status;
  12                 led-running = &led_status;
  13                 led-upgrade = &led_status;
  14         };
  15
  16         leds {
  17                 compatible = "gpio-leds";
  18
  19                 led_status: status {
  20                         label = "vocore2lite:green:status";
  21                         gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
  22                 };
  23         };
  24 };
  25
  26 &spi0 {
  27         status = "okay";
  28
  29         m25p80@0 {
  30                 compatible = "jedec,spi-nor";
  31                 reg = <0>;
  32                 spi-max-frequency = <10000000>;
  33
  34                 partitions {
  35                         compatible = "fixed-partitions";
  36                         #address-cells = <1>;
  37                         #size-cells = <1>;
  38
  39                         partition@0 {
  40                                 label = "u-boot";
  41                                 reg = <0x0 0x30000>;
  42                                 read-only;
  43                         };
  44
  45                         partition@30000 {
  46                                 label = "u-boot-env";
  47                                 reg = <0x30000 0x10000>;
  48                                 read-only;
  49                         };
  50
  51                         factory: partition@40000 {
  52                                 label = "factory";
  53                                 reg = <0x40000 0x10000>;
  54                                 read-only;
  55                         };
  56
  57                         partition@50000 {
  58                                 compatible = "denx,uimage";
  59                                 label = "firmware";
  60                                 reg = <0x50000 0x7b0000>;
  61                         };
  62                 };
  63         };
  64 };