target/linux/ramips/dts/rt5350_dlink_dir-300-b7.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "dlink,dir-300-b7", "ralink,rt5350-soc";
  10         model = "D-Link DIR-300 B7";
  11
  12         aliases {
  13                 led-boot = &led_status;
  14                 led-failsafe = &led_status;
  15                 led-running = &led_status;
  16                 led-upgrade = &led_status;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 led_status: status {
  23                         label = "dir-300-b7:green:status";
  24                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  25                 };
  26
  27                 wps {
  28                         label = "dir-300-b7:blue:wps";
  29                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  30                 };
  31         };
  32
  33         keys {
  34                 compatible = "gpio-keys-polled";
  35                 poll-interval = <20>;
  36
  37                 reset {
  38                         label = "reset";
  39                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  40                         linux,code = <KEY_RESTART>;
  41                 };
  42
  43                 wps {
  44                         label = "wps";
  45                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  46                         linux,code = <KEY_WPS_BUTTON>;
  47                 };
  48         };
  49 };
  50
  51 &spi0 {
  52         status = "okay";
  53
  54         m25p80@0 {
  55                 compatible = "jedec,spi-nor";
  56                 reg = <0>;
  57                 spi-max-frequency = <10000000>;
  58
  59                 partitions {
  60                         compatible = "fixed-partitions";
  61                         #address-cells = <1>;
  62                         #size-cells = <1>;
  63
  64                         partition@0 {
  65                                 label = "u-boot";
  66                                 reg = <0x0 0x30000>;
  67                                 read-only;
  68                         };
  69
  70                         partition@30000 {
  71                                 label = "u-boot-env";
  72                                 reg = <0x30000 0x10000>;
  73                                 read-only;
  74                         };
  75
  76                         factory: partition@40000 {
  77                                 label = "factory";
  78                                 reg = <0x40000 0x10000>;
  79                                 read-only;
  80                         };
  81
  82                         partition@50000 {
  83                                 compatible = "denx,uimage";
  84                                 label = "firmware";
  85                                 reg = <0x50000 0x7b0000>;
  86                         };
  87                 };
  88         };
  89 };
  90
  91 &state_default {
  92         gpio {
  93                 groups = "i2c", "jtag", "uartf";
  94                 function = "gpio";
  95         };
  96 };
  97
  98 &ethernet {
  99         mtd-mac-address = <&factory 0x4>;
 100 };
 101
 102 &esw {
 103         mediatek,portmap = <0x2f>;
 104         mediatek,led_polarity = <0x17>;
 105 };
 106
 107 &wmac {
 108         status = "okay";
 109         ralink,led-polarity = <1>;
 110         ralink,mtd-eeprom = <&factory 0>;
 111 };