// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "ath79.dtsi" / { compatible = "qca,ar7100"; chosen { bootargs = "console=ttyS0,115200"; }; cpus { #address-cells = <1>; #size-cells = <0>; cpu@0 { device_type = "cpu"; compatible = "mips,mips24Kc"; clocks = <&pll ATH79_CLK_CPU>; reg = <0>; }; }; extosc: ref { compatible = "fixed-clock"; #clock-cells = <0>; clock-output-names = "ref"; clock-frequency = <40000000>; }; ahb { apb { ddr_ctrl: memory-controller@18000000 { compatible = "qca,ar7100-ddr-controller"; reg = <0x18000000 0x100>; #qca,ddr-wb-channel-cells = <1>; }; uart: uart@18020000 { compatible = "ns16550a"; reg = <0x18020000 0x20>; interrupts = <3>; clocks = <&pll ATH79_CLK_AHB>; clock-names = "uart"; reg-io-width = <4>; reg-shift = <2>; no-loopback-test; }; usb_phy: usb-phy@18030000 { compatible = "qca,ar7100-usb-phy"; reg = <0x18030000 0x10>; reset-names = "usb-phy", "usb-host", "usb-ohci-dll"; resets = <&rst 4>, <&rst 5>, <&rst 6>; #phy-cells = <0>; status = "disabled"; }; gpio: gpio@18040000 { compatible = "qca,ar7100-gpio"; reg = <0x18040000 0x28>; interrupts = <2>; ngpios = <16>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; pll: pll-controller@18050000 { compatible = "qca,ar7100-pll", "syscon"; reg = <0x18050000 0x20>; clocks = <&extosc>; clock-names = "ref"; #clock-cells = <1>; clock-output-names = "cpu", "ddr", "ahb"; }; wdt: wdt@18060008 { compatible = "qca,ar7130-wdt"; reg = <0x18060008 0x8>; interrupts = <4>; clocks = <&pll ATH79_CLK_AHB>; clock-names = "wdt"; }; pci_intc: interrupt-controller@18060018 { compatible = "qca,ar7100-misc-intc"; reg = <0x18060018 0x4>; interrupt-parent = <&cpuintc>; interrupts = <2>; interrupt-controller; #interrupt-cells = <1>; }; rst: reset-controller@18060024 { compatible = "qca,ar7100-reset"; reg = <0x18060024 0x4>; #reset-cells = <1>; }; pcie0: pcie@17010000 { compatible = "qca,ar7100-pci"; #address-cells = <3>; #size-cells = <2>; bus-range = <0x0 0x0>; reg = <0x17010000 0x100>; reg-names = "cfg_base"; ranges = <0x2000000 0 0x10000000 0x10000000 0 0x07000000 /* pci memory */ 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */ device_type = "pci"; interrupt-parent = <&pci_intc>; interrupts = <4>; #interrupt-cells = <1>; interrupt-map-mask = <0xf800 0 0 0>; interrupt-map = <0x8800 0 0 0 &pci_intc 0 0x9000 0 0 0 &pci_intc 1 0x9800 0 0 0 &pci_intc 2>; status = "disabled"; }; }; }; usb2: usb@1b000000 { compatible = "generic-ehci"; reg = <0x1b000000 0x1000>; interrupt-parent = <&cpuintc>; interrupts = <3>; phy-names = "usb-phy"; phys = <&usb_phy>; has-synopsys-hc-bug; status = "disabled"; #address-cells = <1>; #size-cells = <0>; usb_ehci_port: port@1 { reg = <1>; #trigger-source-cells = <0>; }; }; usb1: usb@1c000000 { compatible = "generic-ohci"; reg = <0x1c000000 0x1000>; interrupt-parent = <&miscintc>; interrupts = <6>; phy-names = "usb-phy"; phys = <&usb_phy>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; usb_ohci_port: port@1 { reg = <1>; #trigger-source-cells = <0>; }; }; spi: spi@1f000000 { compatible = "qca,ar7100-spi"; reg = <0x1f000000 0x10>; clocks = <&pll ATH79_CLK_AHB>; clock-names = "ahb"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; }; &cpuintc { qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>; qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>, <&ddr_ctrl 0>, <&ddr_ctrl 1>; }; &miscintc { compatible = "qca,ar7100-misc-intc"; }; ð0 { compatible = "qca,ar7100-eth", "syscon"; reg = <0x19000000 0x200 0x18070000 0x4>; pll-data = <0x00110000 0x00001099 0x00991099>; pll-reg = <0x4 0x10 17>; pll-handle = <&pll>; phy-mode = "rgmii"; resets = <&rst 9>; reset-names = "mac"; qca,mac-idx = <0>; }; &mdio1 { builtin-switch; }; ð1 { compatible = "qca,ar7100-eth", "syscon"; reg = <0x1a000000 0x200 0x18070004 0x4>; pll-data = <0x00110000 0x00001099 0x00991099>; pll-reg = <0x4 0x14 19>; pll-handle = <&pll>; phy-mode = "rgmii"; resets = <&rst 13>; reset-names = "mac"; qca,mac-idx = <1>; };