// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "ar9331.dtsi" #include #include #include / { compatible = "tplink,tl-wr741n-v4", "qca,ar9331"; model = "TP-Link TL-WR741N/ND v4"; aliases { led-boot = &led_system; led-failsafe = &led_system; led-running = &led_system; led-upgrade = &led_system; label-mac-device = &wmac; }; keys { compatible = "gpio-keys"; reset { label = "reset"; linux,code = ; gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; debounce-interval = <60>; }; wps { label = "wps"; linux,code = ; gpios = <&gpio 26 GPIO_ACTIVE_HIGH>; debounce-interval = <60>; }; }; leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&switch_led_disable_pins>; lan1 { label = "green:lan1"; gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; }; lan2 { label = "green:lan2"; gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; }; lan3 { label = "green:lan3"; gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; }; lan4 { label = "green:lan4"; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; }; qss { label = "green:qss"; gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; }; led_system: system { label = "green:system"; gpios = <&gpio 27 GPIO_ACTIVE_LOW>; }; wan { function = LED_FUNCTION_WAN; color = ; gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; }; wlan { function = LED_FUNCTION_WLAN; color = ; gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tpt"; }; }; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; uboot: partition@0 { reg = <0x0 0x20000>; label = "u-boot"; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_uboot_1fc00: macaddr@1fc00 { compatible = "mac-base"; reg = <0x1fc00 0x6>; #nvmem-cell-cells = <1>; }; }; }; firmware: partition@20000 { compatible = "tplink,firmware"; reg = <0x20000 0x3d0000>; label = "firmware"; }; art: partition@3f0000 { reg = <0x3f0000 0x10000>; label = "art"; read-only; }; }; }; }; ð0 { /* WAN interface, initialized last as eth1 */ status = "okay"; nvmem-cells = <&macaddr_uboot_1fc00 1>; nvmem-cell-names = "mac-address"; gmac-config { device = <&gmac>; switch-phy-addr-swap = <1>; switch-phy-swap = <1>; }; }; ð1 { /* LAN interface, initialized first as eth0 */ status = "okay"; nvmem-cells = <&macaddr_uboot_1fc00 0>; nvmem-cell-names = "mac-address"; }; &wmac { status = "okay"; mtd-cal-data = <&art 0x1000>; nvmem-cells = <&macaddr_uboot_1fc00 0>; nvmem-cell-names = "mac-address"; };