// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include #include #include "ar9341.dtsi" / { aliases { serial0 = &uart; led-boot = &led_power; led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; label-mac-device = &wmac; }; keys: keys { compatible = "gpio-keys"; rfkill { label = "WiFi"; linux,code = ; gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; debounce-interval = <60>; }; }; leds: leds { compatible = "gpio-leds"; led_power: power { label = "tp-link:green:power"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; default-state = "on"; }; wlan { label = "tp-link:green:wlan"; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; qss { label = "tp-link:green:qss"; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; wan { label = "tp-link:green:wan"; gpios = <&gpio 18 GPIO_ACTIVE_LOW>; }; lan1 { label = "tp-link:green:lan1"; gpios = <&gpio 19 GPIO_ACTIVE_LOW>; }; lan2 { label = "tp-link:green:lan2"; gpios = <&gpio 20 GPIO_ACTIVE_LOW>; }; lan3 { label = "tp-link:green:lan3"; gpios = <&gpio 21 GPIO_ACTIVE_LOW>; }; lan4 { label = "tp-link:green:lan4"; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; }; }; }; &ref { clock-frequency = <25000000>; }; &uart { status = "okay"; }; &gpio { pinctrl-names = "default"; pinctrl-0 = <&jtag_disable_pins &pmx_usb_power>; }; &pinmux { pmx_usb_power: usb_power { pinctrl-single,bits = <0x4 0x0 0xff>; }; }; ð0 { status = "okay"; phy-handle = <&swphy0>; mtd-mac-address = <&uboot 0x1fc00>; mtd-mac-address-increment = <(-1)>; }; ð1 { mtd-mac-address = <&uboot 0x1fc00>; gmac-config { device = <&gmac>; switch-phy-swap = <1>; }; }; &wmac { status = "okay"; mtd-cal-data = <&art 0x1000>; mtd-mac-address = <&uboot 0x1fc00>; };