// SPDX-License-Identifier: GPL-2.0-only #include "ar9344.dtsi" #include #include / { compatible = "ubnt,wa", "qca,ar9342"; model = "Ubiquiti Networks WA board"; keys { compatible = "gpio-keys"; reset { label = "Reset button"; linux,code = ; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; }; }; &ref { clock-frequency = <40000000>; }; &pcie { status = "okay"; wifi@0,0 { compatible = "qcom,ath10k"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&cal_art_5000>; nvmem-cell-names = "calibration"; }; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x000000 0x040000>; read-only; }; partition@40000 { label = "u-boot-env"; reg = <0x040000 0x010000>; read-only; }; partition@50000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x050000 0xf60000>; }; partition@fb0000 { label = "cfg"; reg = <0xfb0000 0x040000>; read-only; }; art: partition@ff0000 { label = "art"; reg = <0xff0000 0x010000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_art_0: macaddr@0 { reg = <0x0 0x6>; }; cal_art_5000: calibration@5000 { reg = <0x5000 0x844>; }; }; }; }; }; }; &wmac { status = "okay"; ieee80211-freq-limit = <2402000 2482000>; mtd-cal-data = <&art 0x1000>; };