// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "qca955x.dtsi" #include #include #include / { aliases { led-boot = &led_system; led-failsafe = &led_system; led-running = &led_system; led-upgrade = &led_system; label-mac-device = ð0; }; keys { compatible = "gpio-keys"; reset { label = "Reset button"; linux,code = ; gpios = <&gpio 16 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; }; leds { compatible = "gpio-leds"; wlan { function = LED_FUNCTION_WLAN; color = ; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; led_system: system { label = "green:system"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; default-state = "on"; }; sig1 { label = "green:sig1"; gpios = <&gpio 4 GPIO_ACTIVE_LOW>; }; sig2 { label = "green:sig2"; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; }; }; &pcie0 { status = "okay"; }; &pcie1 { status = "okay"; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions: partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x000000 0x040000>; read-only; }; partition@40000 { label = "u-boot-env"; reg = <0x040000 0x010000>; read-only; }; pridata: partition@50000 { label = "pri-data"; reg = <0x050000 0x010000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_pridata_400: macaddr@400 { compatible = "mac-base"; reg = <0x400 0x6>; #nvmem-cell-cells = <1>; }; }; }; art: partition@60000 { label = "art"; reg = <0x060000 0x010000>; read-only; }; }; }; }; &mdio0 { status = "okay"; phy0: ethernet-phy@0 { reg = <0>; qca,ar8327-initvals = < 0x04 0x00080080 /* PORT0 PAD MODE CTRL */ 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */ 0x10 0x81000080 /* POWER_ON_STRAP */ 0x50 0xcc35cc35 /* LED_CTRL0 */ 0x54 0xca35ca35 /* LED_CTRL1 */ 0x58 0xc935c935 /* LED_CTRL2 */ 0x5c 0x03ffff00 /* LED_CTRL3 */ 0x7c 0x0000007e /* PORT0_STATUS */ 0x94 0x0000007e /* PORT6 STATUS */ >; }; }; ð0 { status = "okay"; pll-data = <0x56000000 0x00000101 0x00001616>; phy-handle = <&phy0>; nvmem-cells = <&macaddr_pridata_400 1>; nvmem-cell-names = "mac-address"; }; ð1 { status = "okay"; pll-data = <0x03000101 0x00000101 0x00001616>; nvmem-cells = <&macaddr_pridata_400 0>; nvmem-cell-names = "mac-address"; fixed-link { speed = <1000>; full-duplex; }; }; &usb_phy0 { status = "okay"; }; &usb0 { status = "okay"; }; &usb_phy1 { status = "okay"; }; &usb1 { status = "okay"; }; &wmac { status = "okay"; mtd-cal-data = <&art 0x1000>; };