// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "qca956x.dtsi" #include #include #include / { compatible = "glinet,gl-ar750s", "qca,qca9563"; model = "GL.iNet GL-AR750S"; aliases { led-boot = &led_power; led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; label-mac-device = ð0; }; keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&jtag_disable_pins>; reset { label = "reset"; linux,code = ; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; }; mode { label = "mode"; linux,code = ; linux,input-type = ; gpios = <&gpio 8 GPIO_ACTIVE_LOW>; }; }; leds { compatible = "gpio-leds"; led_power: power { function = LED_FUNCTION_POWER; color = ; gpios = <&gpio 1 GPIO_ACTIVE_LOW>; default-state = "keep"; }; led_wlan2g: wlan2g { label = "green:wlan2g"; gpios = <&gpio 19 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy1tpt"; }; led_wlan5g: wlan5g { label = "green:wlan5g"; gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tpt"; }; }; i2c: i2c { compatible = "i2c-gpio"; sda-gpios = <&gpio 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; scl-gpios = <&gpio 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; }; }; &spi { status = "okay"; flash_nor: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; nor_partitions: partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x000000 0x040000>; read-only; }; partition@40000 { label = "u-boot-env"; reg = <0x040000 0x010000>; }; art: partition@50000 { label = "art"; reg = <0x050000 0x010000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_art_0: macaddr@0 { compatible = "mac-base"; reg = <0x0 0x6>; #nvmem-cell-cells = <1>; }; cal_art_5000: calibration@5000 { reg = <0x5000 0x844>; }; }; }; /* Firmware / Kernel flash type specific */ }; }; flash_nand: flash@1 { compatible = "spi-nand"; reg = <1>; spi-max-frequency = <25000000>; nand_partitions: partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; nand_ubi: partition@0 { label = "nand_ubi"; reg = <0x000000 0x8000000>; }; }; }; }; ð0 { status = "okay"; phy-handle = <&phy0>; nvmem-cells = <&macaddr_art_0 0>; nvmem-cell-names = "mac-address"; }; &gpio { usb_vbus { gpio-hog; gpios = <7 GPIO_ACTIVE_HIGH>; output-high; line-name = "usb-vbus"; }; }; &mdio0 { status = "okay"; phy0: ethernet-phy@0 { reg = <0>; phy-mode = "sgmii"; qca,ar8327-initvals = < 0x04 0x00080080 /* PORT0 PAD MODE CTRL */ 0x7c 0x0000007e /* PORT0_STATUS */ >; }; }; &pcie { status = "okay"; wifi@0,0 { compatible = "qcom,ath10k"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&cal_art_5000>, <&macaddr_art_0 1>; nvmem-cell-names = "calibration", "mac-address"; }; }; &usb0 { status = "okay"; }; &usb1 { status = "okay"; }; &usb_phy0 { status = "okay"; }; &usb_phy1 { status = "okay"; }; &wmac { status = "okay"; mtd-cal-data = <&art 0x1000>; };