/dts-v1/; /include/ "rt5350.dtsi" / { compatible = "RT5350F-OLINUXINO-EVB", "ralink,rt5350-soc"; model = "Olimex RT5350F-OLinuXino-EVB"; palmbus@10000000 { spi@b00 { status = "okay"; m25p80@0 { #address-cells = <1>; #size-cells = <1>; compatible = "s25fl064k"; reg = <0 0>; linux,modalias = "m25p80", "s25fl064k"; spi-max-frequency = <10000000>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { label = "firmware"; reg = <0x50000 0x3b0000>; }; }; }; gpio1: gpio@660 { status = "okay"; }; }; pinctrl { state_default: pinctrl0 { gpio { ralink,group = "jtag", "rgmii", "mdio", "uartf"; ralink,function = "gpio"; }; }; }; ethernet@10100000 { mtd-mac-address = <&factory 0x4>; }; esw@10110000 { ralink,portmap = <0x2f>; ralink,led_polarity = <0x17>; }; wmac@10180000 { ralink,mtd-eeprom = <&factory 0>; }; ehci@101c0000 { status = "okay"; }; ohci@101c1000 { status = "okay"; }; gpio_export { compatible = "gpio-export"; #size-cells = <0>; relay1 { gpio-export,name = "gpio12"; gpio-export,output = <0>; gpios = <&gpio0 12 0>; }; relay2 { gpio-export,name = "gpio14"; gpio-export,output = <0>; gpios = <&gpio0 14 0>; }; button { gpio-export,name = "button"; gpios = <&gpio0 0 1>; }; }; };