// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "mt7621.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	aliases {
		led-boot = &led_power;
		led-failsafe = &led_power;
		led-running = &led_power;
		led-upgrade = &led_power;
	};

	chosen {
		bootargs = "console=ttyS0,57600";
	};

	palmbus: palmbus@1E000000 {
		i2c@900 {
			status = "okay";
		};
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};

		wps {
			label = "wps";
			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WPS_BUTTON>;
		};
	};

	leds {
		compatible = "gpio-leds";

		led_power: power {
			label = "rt-ac85p:blue:power";
			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
		};
		wlan2g {
			label = "rt-ac85p:blue:wlan2g";
			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy0radio";
		};

		wlan5g {
			label = "rt-ac85p:blue:wlan5g";
			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy1radio";
		};
	};
};

&sdhci {
	status = "okay";
};

&nand {
	status = "okay";

	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		partition@0 {
			label = "u-boot";
			reg = <0x0 0xe0000>;
			read-only;
		};

		partition@e0000 {
			label = "u-boot-env";
			reg = <0xe0000 0x100000>;
			read-only;
		};

		factory: partition@1e0000 {
			label = "factory";
			reg = <0x1e0000 0x100000>;
			read-only;
		};

		factory2: partition@2e0000 {
			label = "factory2";
			reg = <0x2e0000 0x100000>;
			read-only;
		};

		partition@3e0000 {
			label = "kernel";
			reg = <0x3e0000 0x400000>;
		};

		partition@7e0000 {
			label = "ubi";
			reg = <0x7e0000 0x2e00000>;
		};

		partition@35e0000 {
			label = "firmware2";
			reg = <0x35e0000 0x3200000>;
		};
	};
};

&pcie {
	status = "okay";
};

&pcie0 {
	wifi0: wifi@0,0 {
		compatible = "pci14c3,7615";
		reg = <0x0000 0 0 0 0>;
		mediatek,mtd-eeprom = <&factory 0x0000>;
		ieee80211-freq-limit = <2400000 2500000>;
	};
};

&pcie1 {
	wifi1: wifi@0,0 {
		compatible = "pci14c3,7615";
		reg = <0x0000 0 0 0 0>;
		mediatek,mtd-eeprom = <&factory 0x8000>;
		ieee80211-freq-limit = <5000000 6000000>;
	};
};

&ethernet {
	mtd-mac-address = <&factory 0xe000>;
	mediatek,portmap = "wllll";
	port@5 {
		status = "disabled";
	};
};

&i2c {
	status = "disabled";
};

&state_default {
	gpio {
		ralink,group = "uart2", "uart3", "i2c";
		ralink,function = "gpio";
	};
};