my $ret;
while ($_ = shift @_) {
- /arm_v(\w+)/ and $ret .= "\tselect arm_v$1\n";
- /broken/ and $ret .= "\tdepends on BROKEN\n";
- /audio/ and $ret .= "\tselect AUDIO_SUPPORT\n";
- /display/ and $ret .= "\tselect DISPLAY_SUPPORT\n";
- /dt/ and $ret .= "\tselect USES_DEVICETREE\n";
- /gpio/ and $ret .= "\tselect GPIO_SUPPORT\n";
- /pci/ and $ret .= "\tselect PCI_SUPPORT\n";
- /pcie/ and $ret .= "\tselect PCIE_SUPPORT\n";
- /usb/ and $ret .= "\tselect USB_SUPPORT\n";
- /usbgadget/ and $ret .= "\tselect USB_GADGET_SUPPORT\n";
- /pcmcia/ and $ret .= "\tselect PCMCIA_SUPPORT\n";
- /rtc/ and $ret .= "\tselect RTC_SUPPORT\n";
- /squashfs/ and $ret .= "\tselect USES_SQUASHFS\n";
- /jffs2$/ and $ret .= "\tselect USES_JFFS2\n";
- /jffs2_nand/ and $ret .= "\tselect USES_JFFS2_NAND\n";
- /ext4/ and $ret .= "\tselect USES_EXT4\n";
- /targz/ and $ret .= "\tselect USES_TARGZ\n";
- /cpiogz/ and $ret .= "\tselect USES_CPIOGZ\n";
- /ubifs/ and $ret .= "\tselect USES_UBIFS\n";
- /fpu/ and $ret .= "\tselect HAS_FPU\n";
- /spe_fpu/ and $ret .= "\tselect HAS_SPE_FPU\n";
- /ramdisk/ and $ret .= "\tselect USES_INITRAMFS\n";
- /powerpc64/ and $ret .= "\tselect powerpc64\n";
- /nommu/ and $ret .= "\tselect NOMMU\n";
- /mips16/ and $ret .= "\tselect HAS_MIPS16\n";
- /rfkill/ and $ret .= "\tselect RFKILL_SUPPORT\n";
- /low_mem/ and $ret .= "\tselect LOW_MEMORY_FOOTPRINT\n";
- /nand/ and $ret .= "\tselect NAND_SUPPORT\n";
+ /^arm_v(\w+)$/ and $ret .= "\tselect arm_v$1\n";
+ /^broken$/ and $ret .= "\tdepends on BROKEN\n";
+ /^audio$/ and $ret .= "\tselect AUDIO_SUPPORT\n";
+ /^display$/ and $ret .= "\tselect DISPLAY_SUPPORT\n";
+ /^dt$/ and $ret .= "\tselect USES_DEVICETREE\n";
+ /^gpio$/ and $ret .= "\tselect GPIO_SUPPORT\n";
+ /^pci$/ and $ret .= "\tselect PCI_SUPPORT\n";
+ /^pcie$/ and $ret .= "\tselect PCIE_SUPPORT\n";
+ /^usb$/ and $ret .= "\tselect USB_SUPPORT\n";
+ /^usbgadget$/ and $ret .= "\tselect USB_GADGET_SUPPORT\n";
+ /^pcmcia$/ and $ret .= "\tselect PCMCIA_SUPPORT\n";
+ /^rtc$/ and $ret .= "\tselect RTC_SUPPORT\n";
+ /^squashfs$/ and $ret .= "\tselect USES_SQUASHFS\n";
+ /^jffs2$/ and $ret .= "\tselect USES_JFFS2\n";
+ /^jffs2_nand$/ and $ret .= "\tselect USES_JFFS2_NAND\n";
+ /^ext4$/ and $ret .= "\tselect USES_EXT4\n";
+ /^targz$/ and $ret .= "\tselect USES_TARGZ\n";
+ /^cpiogz$/ and $ret .= "\tselect USES_CPIOGZ\n";
+ /^minor$/ and $ret .= "\tselect USES_MINOR\n";
+ /^ubifs$/ and $ret .= "\tselect USES_UBIFS\n";
+ /^fpu$/ and $ret .= "\tselect HAS_FPU\n";
+ /^spe_fpu$/ and $ret .= "\tselect HAS_SPE_FPU\n";
+ /^ramdisk$/ and $ret .= "\tselect USES_INITRAMFS\n";
+ /^powerpc64$/ and $ret .= "\tselect powerpc64\n";
+ /^nommu$/ and $ret .= "\tselect NOMMU\n";
+ /^mips16$/ and $ret .= "\tselect HAS_MIPS16\n";
+ /^rfkill$/ and $ret .= "\tselect RFKILL_SUPPORT\n";
+ /^low_mem$/ and $ret .= "\tselect LOW_MEMORY_FOOTPRINT\n";
+ /^small_flash$/ and $ret .= "\tselect SMALL_FLASH\n";
+ /^nand$/ and $ret .= "\tselect NAND_SUPPORT\n";
+ /^virtio$/ and $ret .= "\tselect VIRTIO_SUPPORT\n";
+ /^rootfs-part$/ and $ret .= "\tselect USES_ROOTFS_PART\n";
+ /^boot-part$/ and $ret .= "\tselect USES_BOOT_PART\n";
}
return $ret;
}
target_name($a) cmp target_name($b);
} @target;
+ foreach my $target (@target_sort) {
+ next if @{$target->{subtargets}} > 0;
+ print <<EOF;
+config DEFAULT_TARGET_$target->{conf}
+ bool
+ depends on TARGET_PER_DEVICE_ROOTFS
+ default y if TARGET_$target->{conf}
+EOF
+ foreach my $pkg (@{$target->{packages}}) {
+ print "\tselect DEFAULT_$pkg if TARGET_PER_DEVICE_ROOTFS\n";
+ }
+ }
print <<EOF;
choice
choice
prompt "Target Profile"
+ default TARGET_MULTI_PROFILE if BUILDBOT
EOF
foreach my $target (@target) {
my $profile = $target->{profiles}->[0];
$profile or next;
print <<EOF;
- default TARGET_$target->{conf}_$profile->{id} if TARGET_$target->{conf}
+ default TARGET_$target->{conf}_$profile->{id} if TARGET_$target->{conf} && !BUILDBOT
EOF
}
config TARGET_MULTI_PROFILE
bool "Multiple devices"
depends on HAS_DEVICES
+ help
+ Instead of only building a single image, or all images, this allows you
+ to select images to be built for multiple devices in one build.
EOF
menu "Target Devices"
depends on TARGET_MULTI_PROFILE
+ config TARGET_ALL_PROFILES
+ bool "Enable all profiles by default"
+ default BUILDBOT
+
+ config TARGET_PER_DEVICE_ROOTFS
+ bool "Use a per-device root filesystem that adds profile packages"
+ default BUILDBOT
+ help
+ When disabled, all device packages from all selected devices
+ will be included in all images by default. (Marked as <*>) You will
+ still be able to manually deselect any/all packages.
+ When enabled, each device builds it's own image, including only the
+ profile packages for that device. (Marked as {M}) You will be able
+ to change a package to included in all images by marking as {*}, but
+ will not be able to disable a profile package completely.
+
+ To get the most use of this setting, you must set in a .config stub
+ before calling "make defconfig". Selecting TARGET_MULTI_PROFILE and
+ then manually selecting (via menuconfig for instance) this option
+ will have pre-defaulted all profile packages to included, making this
+ option appear to have had no effect.
+
EOF
foreach my $target (@target) {
- my $profiles = $target->{profiles};
- foreach my $profile (@{$target->{profiles}}) {
+ my @profiles = sort {
+ my $x = $a->{name};
+ my $y = $b->{name};
+ "\L$x" cmp "\L$y";
+ } @{$target->{profiles}};
+ foreach my $profile (@profiles) {
next unless $profile->{id} =~ /^DEVICE_/;
print <<EOF;
-config TARGET_DEVICE_$target->{conf}_$profile->{id}
+menuconfig TARGET_DEVICE_$target->{conf}_$profile->{id}
bool "$profile->{name}"
depends on TARGET_$target->{conf}
+ default y if TARGET_ALL_PROFILES
EOF
my @pkglist = merge_package_lists($target->{packages}, $profile->{packages});
foreach my $pkg (@pkglist) {
- print "\tselect DEFAULT_$pkg\n";
+ print "\tselect DEFAULT_$pkg if !TARGET_PER_DEVICE_ROOTFS\n";
+ print "\tselect MODULE_DEFAULT_$pkg if TARGET_PER_DEVICE_ROOTFS\n";
$defaults{$pkg} = 1;
}
+
+ print <<EOF;
+
+
+ config TARGET_DEVICE_PACKAGES_$target->{conf}_$profile->{id}
+ string "$profile->{name} additional packages"
+ default ""
+ depends on TARGET_PER_DEVICE_ROOTFS
+ depends on TARGET_DEVICE_$target->{conf}_$profile->{id}
+
+EOF
}
}
EOF
}
foreach my $def (sort keys %defaults) {
- print "\tconfig DEFAULT_".$def."\n";
- print "\t\tbool\n\n";
+ print <<EOF;
+ config DEFAULT_$def
+ bool
+
+ config MODULE_DEFAULT_$def
+ tristate
+ depends on TARGET_PER_DEVICE_ROOTFS
+ depends on m
+ default m if DEFAULT_$def
+ select PACKAGE_$def
+
+EOF
}
}
projects / openwrt / staging / wigyori.git / blobdiff