ar71xx: add support for PQI Air Pen

[openwrt/staging/wigyori.git] / target / linux / ar71xx / base-files / etc / board.d / 01_leds

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index c6dcf36fed408683d2025fbcc273d37fb17a28a4..7a7329f9653156132d7a8f3b87b28588c7f8c8ff 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -152,7 +152,9 @@ cf-e530n)
        ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1"
        ;;
 cpe210|\
-cpe510)
+cpe510|\
+wbs210|\
+wbs510)
        ucidef_set_led_switch "lan0" "LAN0" "tp-link:green:lan0" "switch0" "0x20"
        ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
        ucidef_set_rssimon "wlan0" "200000" "1"
@@ -199,6 +201,9 @@ rb-750)
        ucidef_set_led_switch "port4" "port4" "rb750:green:port4" "switch0" "0x04"
        ucidef_set_led_switch "port5" "port5" "rb750:green:port5" "switch0" "0x02"
        ;;
+rb-941-2nd)
+       ucidef_set_led_timer "act" "act" "rb:green:act" "1000" "1000"
+       ;;
 rb-2011l|\
 rb-2011uas|\
 rb-2011uias|\
@@ -277,6 +282,7 @@ gl-mifi)
        esac
        ;;
 gl-domino|\
+sc300m|\
 wrt160nl)
        ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
        ;;
@@ -425,6 +431,10 @@ omy-x1)
        ucidef_set_led_default "power" "POWER" "omy:green:power" "1"
        ucidef_set_led_default "wan" "WAN" "omy:green:wan" "eth0"
        ;;
+pqi-air-pen)
+       ucidef_set_led_wlan "wlan" "WLAN" "pqi-air-pen:blue:wlan" "phy0tpt"
+       ucidef_set_led_default "wps" "WPS" "pqi-air-pen:blue:wps" "0"
+       ;;
 qihoo-c301)
        ucidef_set_led_wlan "wlan2g" "WLAN2G" "qihoo:red:status" "phy1tpt"
        ;;
@@ -434,6 +444,10 @@ re450)
        ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan2g" "phy1tpt"
        ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan5g" "phy0tpt"
        ;;
+sc1750|\
+sc450)
+       ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
+       ;;
 smart-300)
        ucidef_set_led_netdev "wan" "WAN" "nc-link:green:wan" "eth0"
        ucidef_set_led_switch "lan1" "LAN1" "nc-link:green:lan1" "switch0" "0x04"