ar71xx: add support for PQI Air Pen

[openwrt/staging/wigyori.git] / target / linux / ar71xx / base-files / etc / board.d / 02_network

diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 57d690d60cc9c06ffd0b3520216e24c381454d1c..09986c03a2f8e6d005626669773d4961d00f7c5c 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -83,7 +83,9 @@ ar71xx_setup_interfaces()
        mr900|\
        mr900v2|\
        mynet-rext|\
+       pqi-air-pen|\
        rb-411|\
+       rb-411u|\
        rb-911g-2hpnd|\
        rb-911g-5hpacd|\
        rb-911g-5hpnd|\
@@ -91,7 +93,9 @@ ar71xx_setup_interfaces()
        rb-912uag-5hpnd|\
        rb-sxt2n|\
        rb-sxt5n|\
+       re450|\
        rocket-m-xw|\
+       sc300m |\
        tl-mr10u|\
        tl-mr11u|\
        tl-mr12u|\
@@ -119,7 +123,6 @@ ar71xx_setup_interfaces()
                ;;
        alfa-ap96|\
        alfa-nx|\
-       ap83|\
        gl-ar150|\
        gl-ar300m|\
        gl-domino|\
@@ -147,8 +150,6 @@ ar71xx_setup_interfaces()
        ubnt-unifi-outdoor)
                ucidef_set_interface_lan "eth0 eth1"
                ;;
-       ap113|\
-       pb92|\
        wzr-hp-g300nh2)
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "2:wan"
@@ -214,7 +215,9 @@ ar71xx_setup_interfaces()
                ucidef_set_interface_lan "eth0" "dhcp"
                ;;
        cpe210|\
-       cpe510)
+       cpe510|\
+       wbs210|\
+       wbs510)
                ucidef_add_switch "switch0" \
                        "0@eth0" "5:lan" "4:wan"
                ;;
@@ -239,6 +242,10 @@ ar71xx_setup_interfaces()
        dap-2695-a1)
                ucidef_add_switch "switch0" "0@eth0" "2:lan" "3:wan" "6@eth1"
                ;;
+       rb-941-2nd)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:wan:1"
+       ;;
        db120|\
        rb-2011l|\
        rb-2011uas|\
@@ -268,7 +275,7 @@ ar71xx_setup_interfaces()
        tl-mr3420-v2|\
        tl-wdr6500-v2|\
        tl-wr841n-v8|\
-       tl-wr842n-v2|\
+       tl-wr940n-v4|\
        tl-wr941nd-v5|\
        tl-wr941nd-v6|\
        wnr1000-v2|\
@@ -302,7 +309,8 @@ ar71xx_setup_interfaces()
                ;;
        dir-869-a1|\
        epg5000|\
-       esr1750)
+       esr1750|\
+       tl-wr1043nd-v4)
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
                ;;
@@ -391,6 +399,11 @@ ar71xx_setup_interfaces()
                ucidef_set_interface_raw "eth" "eth0"
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
                ;;
+       tl-wr842n-v2)
+               ucidef_set_interfaces_lan_wan "eth1" "eth0"
+               ucidef_add_switch "switch0" \
+                       "0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
+               ;;
        uap-pro|\
        wpj342)
                ucidef_add_switch "switch0" \
@@ -457,6 +470,9 @@ ar71xx_setup_macs()
                lan_mac=$(mtd_get_mac_binary caldata 0)
                wan_mac=$(mtd_get_mac_binary caldata 6)
                ;;
+       tl-wr1043nd-v4)
+               wan_mac=$(mtd_get_mac_binary config 0x1017c)
+               ;;
        esr900)
                wan_mac=$(mtd_get_mac_ascii u-boot-env "wanaddr")
                ;;