ar71xx: add TP-Link TL-WA901ND-v4 support

[openwrt/staging/wigyori.git] / target / linux / ar71xx / base-files / etc / board.d / 02_network

diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 6b6c6a465f6bde8f0e8ee8fc8b48cdf61457706b..8fdfa0700eda911dfc158e1cebdec1b6c2531ee3 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -23,6 +23,7 @@ ubnt-unifi-outdoor)
        ;;
 
 ap132 |\
+ap152 |\
 wlr8100)
        ucidef_add_switch "switch0" \
                "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
@@ -191,6 +192,11 @@ el-m150)
                "0:lan" "1:lan" "3@eth1" # XXX: confirm!
        ;;
 
+tellstick-znet-lite)
+       ucidef_set_interface_wan "eth0" "dhcp"
+       ucidef_set_interface_raw "wlan" "wlan0" "dhcp"
+       ;;
+
 tl-wdr4300|\
 tl-wr1041n-v2)
        ucidef_add_switch "switch0" \
@@ -226,7 +232,8 @@ wnr2000-v3 |\
 wnr2000-v4 |\
 wnr2200 |\
 wnr612-v2 |\
-wnr1000-v2)
+wnr1000-v2 |\
+wpn824n)
        ucidef_set_interfaces_lan_wan "eth1" "eth0"
        ucidef_add_switch "switch0" \
                "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4@eth1" # XXX: confirm!
@@ -308,12 +315,12 @@ dlan-pro-500-wp)
 
 dlan-pro-1200-ac)
        ucidef_set_interface_lan "eth0"
-       ucidef_add_switch "switch0"
-       ucidef_add_switch_attr "switch0" "reset" "false"
-       ucidef_add_switch_ports "switch0" \
+       ucidef_add_switch "switch0" \
                "0@eth0" "2:lan" "3:lan" "4:lan"
+       ucidef_add_switch_attr "switch0" "enable" "false"
        ;;
 
+alfa-ap120c |\
 all0305 |\
 antminer-s1 |\
 antminer-s3 |\
@@ -357,8 +364,10 @@ tl-wa801nd-v2 |\
 tl-wa901nd |\
 tl-wa901nd-v2 |\
 tl-wa901nd-v3 |\
+tl-wa901nd-v4 |\
 tl-wr703n |\
 tube2h |\
+unifiac |\
 wndap360 |\
 mynet-rext |\
 wp543)
@@ -369,7 +378,8 @@ cap324)
        ucidef_set_interface_lan "eth0" "dhcp"
        ;;
 
-arduino-yun | \
+arduino-yun |\
+tl-wa801nd-v3 |\
 dir-505-a1)
        ucidef_set_interface_lan "eth1"
        ;;
@@ -396,6 +406,11 @@ gl-ar300)
                "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
        ;;
 
+wpj342)
+       ucidef_add_switch "switch0" \
+               "0@eth0" "1:lan" "2:wan"
+       ;;
+
 wpj344)
        ucidef_add_switch "switch0" \
                "0@eth0" "3:lan" "2:wan"