ar71xx: add support for MikroTik hAP ac
[openwrt/staging/wigyori.git] / target / linux / ar71xx / files / arch / mips / ath79 / Kconfig.openwrt
index 815c0eb..5f81ebd 100644 (file)
@@ -1,3 +1,21 @@
+config ATH79_MACH_A60
+       bool "OpenMesh A40/A60 board support"
+       select SOC_QCA955X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+       select ATH79_DEV_USB
+
+config ATH79_MACH_ALFA_AP120C
+       bool "ALFA Network AP120C board support"
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_ALFA_AP96
        bool "ALFA Network AP96 board support"
        select SOC_AR71XX
@@ -34,6 +52,39 @@ config ATH79_MACH_TUBE2H
        select ATH79_DEV_M25P80
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_SC1750
+       bool "Abicom SC1750 board support"
+       select SOC_QCA955X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
+config ATH79_MACH_SC300M
+       bool "Abicom SC300M board support"
+       select SOC_QCA955X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
+config ATH79_MACH_SC450
+       bool "Abicom SC450 board support"
+       select SOC_QCA955X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_ALL0258N
        bool "Allnet ALL0258N support"
        select SOC_AR724X
@@ -72,8 +123,8 @@ config ATH79_MACH_ANTMINER_S3
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
 
-config ATH79_MACH_ARDUINO_YUN
-       bool "Arduino Yun"
+config ATH79_MACH_ANTROUTER_R1
+       bool "Bitmain Antrouter R1 support"
        select SOC_AR933X
        select ATH79_DEV_ETH
        select ATH79_DEV_GPIO_BUTTONS
@@ -81,19 +132,16 @@ config ATH79_MACH_ARDUINO_YUN
        select ATH79_DEV_M25P80
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
-       help
-         Say 'Y' here if you want your kernel to support the
-         Arduino Yun.
 
-config ATH79_MACH_AP113
-       bool "Atheros AP113 board support"
-       select SOC_AR724X
-       select ATH79_DEV_M25P80
-       select ATH79_DEV_PB9X_PCI if PCI
+config ATH79_MACH_ARDUINO_YUN
+       bool "Arduino Yun"
+       select SOC_AR933X
+       select ATH79_DEV_ETH
        select ATH79_DEV_GPIO_BUTTONS
        select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
        select ATH79_DEV_USB
-       select ATH79_DEV_ETH
+       select ATH79_DEV_WMAC
 
 config ATH79_MACH_AP132
        bool "Atheros AP132 reference board"
@@ -103,9 +151,6 @@ config ATH79_MACH_AP132
        select ATH79_DEV_M25P80
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
-       help
-         Say 'Y' here if you want your kernel to support the
-         Atheros AP132 reference boards.
 
 config ATH79_MACH_AP143
        bool "Atheros AP143 reference board"
@@ -117,9 +162,6 @@ config ATH79_MACH_AP143
        select ATH79_DEV_WMAC
        select ATH79_DEV_ETH
        select ATH79_DEV_M25P80
-       help
-         Say 'Y' here if you want your kernel to support the
-         Atheros AP143 reference board.
 
 config ATH79_MACH_AP147
        bool "Atheros AP147 reference board"
@@ -130,9 +172,6 @@ config ATH79_MACH_AP147
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
        select ATH79_DEV_AP9X_PCI if PCI
-       help
-         Say 'Y' here if you want your kernel to support the
-         QCA AP147 reference boards.
 
 config ATH79_MACH_AP152
        bool "Atheros AP152 reference board"
@@ -143,19 +182,28 @@ config ATH79_MACH_AP152
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
        select ATH79_DEV_AP9X_PCI if PCI
-       help
-         Say 'Y' here if you want your kernel to support the
-         QCA AP152 reference boards.
 
-
-config ATH79_MACH_AP83
-       bool "Atheros AP83 board support"
-       select SOC_AR913X
+config ATH79_MACH_AP531B0
+       bool "Rockeetech AP531B0 support"
+       select SOC_QCA953X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
        select ATH79_DEV_GPIO_BUTTONS
        select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_SPI
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_AP90Q
+       bool "YunCore AP90Q support"
+       select SOC_QCA953X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_AP96
        bool "Atheros AP96 board support"
        select SOC_AR71XX
@@ -173,13 +221,26 @@ config ATH79_MACH_PB42
        select ATH79_DEV_GPIO_BUTTONS
        select ATH79_DEV_M25P80
 
-config ATH79_MACH_PB92
-       bool "Atheros PB92 board support"
-       select SOC_AR724X
+config ATH79_MACH_C55
+       bool "AirTight Networks C-55 support"
+       select SOC_AR934X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+
+config ATH79_MACH_C60
+       bool "AirTight Networks C-60 support"
+       select SOC_AR934X
+       select ATH79_DEV_AP9X_PCI if PCI
        select ATH79_DEV_ETH
        select ATH79_DEV_GPIO_BUTTONS
        select ATH79_DEV_LEDS_GPIO
-       select ATH79_DEV_PB9X_PCI if PCI
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+       select ATH79_DEV_NFC
        select ATH79_DEV_USB
 
 config ATH79_MACH_AW_NR580
@@ -220,6 +281,46 @@ config ATH79_MACH_ESR1750
        select ATH79_DEV_M25P80
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
+       select ATH79_NVRAM
+
+config ATH79_MACH_PQI_AIR_PEN
+       bool "PQI Air Pen"
+       select SOC_AR933X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
+config ATH79_MACH_SOM9331
+       bool "SOM9331 support"
+       select SOC_AR933X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
+config ATH79_MACH_SR3200
+       bool "YunCore SR3200 support"
+       select SOC_QCA956X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
+config ATH79_MACH_BHR_4GRV2
+       bool "Buffalo BHR-4GRV2 board support"
+       select SOC_QCA955X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
 
 config ATH79_MACH_WHR_HP_G300N
        bool "Buffalo WHR-HP-G300N board support"
@@ -318,6 +419,16 @@ config ATH79_MACH_WPE72
        select ATH79_DEV_USB
        select MYLOADER
 
+config ATH79_MACH_WPJ342
+       bool "Compex WPJ342 board support"
+       select SOC_AS934X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_WPJ344
        bool "Compex WPJ344 board support"
        select SOC_AS934X
@@ -329,14 +440,14 @@ config ATH79_MACH_WPJ344
        select ATH79_DEV_WMAC
 
 config ATH79_MACH_WPJ531
-       bool "Compex WPJ531 board support"
-       select SOC_QCA953X
-       select ATH79_DEV_ETH
-       select ATH79_DEV_GPIO_BUTTONS
-       select ATH79_DEV_LEDS_GPIO
-       select ATH79_DEV_M25P80
-       select ATH79_DEV_USB
-       select ATH79_DEV_WMAC
+       bool "Compex WPJ531 board support"
+       select SOC_QCA953X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
 
 config ATH79_MACH_WPJ558
        bool "Compex WPJ558 board support"
@@ -348,6 +459,16 @@ config ATH79_MACH_WPJ558
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_XD3200
+       bool "YunCore XD3200 support"
+       select SOC_QCA956X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_DGL_5500_A1
        bool "D-Link DGL-5500 A1 support"
        select SOC_QCA955X
@@ -377,7 +498,6 @@ config ATH79_MACH_DIR_505_A1
        select ATH79_DEV_LEDS_GPIO
        select ATH79_DEV_M25P80
        select ATH79_DEV_WMAC
-       select ATH79_NVRAM
 
 config ATH79_MACH_DIR_600_A1
        bool "D-Link DIR-600 A1/DIR-615 E1/DIR-615 E4 support"
@@ -408,7 +528,6 @@ config ATH79_MACH_DIR_615_I1
        select ATH79_DEV_LEDS_GPIO
        select ATH79_DEV_M25P80
        select ATH79_DEV_WMAC
-       select ATH79_NVRAM
 
 config ATH79_MACH_DIR_825_B1
        bool "D-Link DIR-825 rev. B1 board support"
@@ -431,6 +550,17 @@ config ATH79_MACH_DIR_825_C1
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_DIR_869_A1
+       bool "D-Link DIR-869 rev. A1"
+       select SOC_QCA956X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+       select ATH79_NVRAM
+
 config ATH79_MACH_DLAN_HOTSPOT
        bool "devolo dLAN Hotspot support"
        select SOC_AR933X
@@ -464,6 +594,18 @@ config ATH79_MACH_DLAN_PRO_1200_AC
        select ATH79_DEV_NFC
        select ATH79_DEV_USB
 
+config ATH79_MACH_DOMYWIFI_DW33D
+       bool "DomyWifi DW33D support"
+       select SOC_QCA955X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_NFC
+       select ATH79_DEV_WMAC
+       select ATH79_DEV_USB
+
 config ATH79_MACH_DR344
        bool "Wallys DR344 board support"
        select SOC_AS934X
@@ -474,6 +616,16 @@ config ATH79_MACH_DR344
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_DR531
+       bool "Wallys DR531 board support"
+       select SOC_QCA953X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_DRAGINO2
        bool "DRAGINO V2 support"
        select SOC_AR933X
@@ -484,6 +636,17 @@ config ATH79_MACH_DRAGINO2
        select ATH79_DEV_ETH
        select ATH79_DEV_USB
 
+config ATH79_MACH_E2100L
+       bool "Linksys E2100L board support"
+       select SOC_AR913X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+       select ATH79_NVRAM
+
 config ATH79_MACH_ESR900
        bool "EnGenius ESR900 board support"
        select SOC_QCA955X
@@ -493,6 +656,7 @@ config ATH79_MACH_ESR900
        select ATH79_DEV_M25P80
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
+       select ATH79_NVRAM
 
 config ATH79_MACH_EW_DORIN
        bool "embedded wireless Dorin Platform support"
@@ -502,9 +666,6 @@ config ATH79_MACH_EW_DORIN
        select ATH79_DEV_LEDS_GPIO
        select ATH79_DEV_WMAC
        select ATH79_DEV_ETH
-       help
-         Say 'Y' here if you want your kernel to support the
-         Dorin Platform from www.80211.de .
 
 config ATH79_MACH_EL_M150
        bool "EasyLink EL-M150 support"
@@ -546,6 +707,16 @@ config ATH79_MACH_GL_AR300
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_GL_AR300M
+       bool "GL_AR300M support"
+       select SOC_QCA953X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_GL_DOMINO
        bool "DOMINO support"
        select SOC_AR933X
@@ -556,6 +727,16 @@ config ATH79_MACH_GL_DOMINO
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_GL_MIFI
+       bool "GL MIFI support"
+       select SOC_AR933X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_GL_INET
        bool "GL-INET support"
        select SOC_AR933X
@@ -566,6 +747,15 @@ config ATH79_MACH_GL_INET
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_EAP120
+       bool "TP-LINK EAP120 support"
+       select SOC_AR934X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_EAP300V2
        bool "EnGenius EAP300 v2 support"
        select SOC_AR934X
@@ -586,14 +776,14 @@ config ATH79_MACH_GS_MINIBOX_V1
        select ATH79_DEV_WMAC
 
 config ATH79_MACH_GS_OOLITE
-       bool "GS Oolite V1 support"
-       select SOC_AR933X
-       select ARH79_DEV_ETH
-       select ARH79_DEV_GPIO_BUTTONS
-       select ATH79_DEV_LEDS_GPIO
-       select ATH79_DEV_M25P80
-       select ATH79_DEV_USB
-       select ATH79_DEV_WMAC
+       bool "GS Oolite V1 support"
+       select SOC_AR933X
+       select ARH79_DEV_ETH
+       select ARH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
 
 config ATH79_MACH_HIWIFI_HC6361
        bool "HiWiFi HC6361 board support"
@@ -622,6 +812,15 @@ config ATH79_MACH_JWAP003
        select ATH79_DEV_M25P80
        select ATH79_DEV_USB
 
+config ATH79_MACH_JWAP230
+       bool "jjPlus JWAP230 board support"
+       select SOC_QCA955X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_WRT160NL
        bool "Linksys WRT160NL board support"
        select SOC_AR913X
@@ -642,6 +841,16 @@ config ATH79_MACH_WRT400N
        select ATH79_DEV_LEDS_GPIO
        select ATH79_DEV_M25P80
 
+config ATH79_MACH_WRTNODE2Q
+       bool "WRTnode2Q board support"
+       select SOC_QCA953X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_R6100
        bool "NETGEAR R6100 board support"
        select SOC_AR934X
@@ -699,13 +908,13 @@ config ATH79_MACH_RB922
        select RLE_DECOMPRESS
 
 config ATH79_MACH_RB95X
-       bool "MikroTik RouterBOARD 95X support"
-       select SOC_AR934X
-       select ATH79_DEV_ETH
-       select ATH79_DEV_NFC
-       select ATH79_DEV_WMAC
-       select ATH79_DEV_USB
-       select ATH79_ROUTERBOOT
+       bool "MikroTik RouterBOARD 95X support"
+       select SOC_AR934X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_NFC
+       select ATH79_DEV_WMAC
+       select ATH79_DEV_USB
+       select ATH79_ROUTERBOOT
 
 config ATH79_MACH_RB2011
        bool "MikroTik RouterBOARD 2011 support"
@@ -717,6 +926,32 @@ config ATH79_MACH_RB2011
        select ATH79_DEV_WMAC
        select ATH79_ROUTERBOOT
 
+config ATH79_MACH_RBSPI
+       bool "MikroTik RouterBOARD SPI-NOR support"
+       select SOC_AR934X
+       select SOC_QCA953X
+       select SOC_QCA955X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+       select ATH79_ROUTERBOOT
+       help
+         Say 'Y' here if you want your kernel to support the
+         MikroTik RouterBOARD mAP lite
+         MikroTik RouterBOARD hAP lite
+         MikroTik RouterBOARD hAP
+         MikroTik RouterBOARD hAP ac
+         MikroTik RouterBOARD hAP ac lite
+         MikroTik RouterBOARD hEX PoE lite
+         MikroTik RouterBOARD hEX lite
+         MikroTik RouterBOARD LHG 5
+         MikroTik RouterBOARD cAP (EXPERIMENTAL)
+         MikroTik RouterBOARD mAP (EXPERIMENTAL)
+         MikroTik RouterBOARD wAP (EXPERIMENTAL)
+
 config ATH79_MACH_RBSXTLITE
        bool "MikroTik RouterBOARD SXT Lite"
        select SOC_AR934X
@@ -734,6 +969,16 @@ config ATH79_MACH_SMART_300
        select ATH79_DEV_M25P80
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_TELLSTICK_ZNET_LITE
+       bool "TellStick ZNet Lite"
+       select SOC_AR933X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_WNDAP360
        bool "NETGEAR WNDAP360 board support"
        select SOC_AR71XX
@@ -774,7 +1019,7 @@ config ATH79_MACH_WNR2000
        select ATH79_DEV_WMAC
 
 config ATH79_MACH_WNR2000_V3
-       bool "NETGEAR WNR2000 V3/WNR612 v2/WNR1000 v2 board support"
+       bool "NETGEAR WNR2000 V3/WNR612 v2/WNR1000 v2/WPN824N board support"
        select SOC_AR724X
        select ATH79_DEV_AP9X_PCI if PCI
        select ATH79_DEV_ETH
@@ -806,6 +1051,7 @@ config ATH79_MACH_OM2P
        bool "OpenMesh OM2P board support"
        select SOC_AR724X
        select SOC_AR933X
+       select SOC_QCA953X
        select ATH79_DEV_AP9X_PCI if PCI
        select ATH79_DEV_ETH
        select ATH79_DEV_GPIO_BUTTONS
@@ -823,6 +1069,44 @@ config ATH79_MACH_OM5P
        select ATH79_DEV_M25P80
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_OM5P_AC
+       bool "OpenMesh OM5P-AC board support"
+       select SOC_QCA955X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+
+config ATH79_MACH_OM5P_ACv2
+       bool "OpenMesh OM5P-ACv2 board support"
+       select SOC_QCA955X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+
+config ATH79_MACH_OMY_G1
+       bool "OMYlink OMY G1 support"
+       select SOC_AR934X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
+config ATH79_MACH_OMY_X1
+       bool "OMYlink OMY X1 support"
+       select SOC_AR934X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_ONION_OMEGA
        bool "ONION OMEGA support"
        select SOC_AR933X
@@ -893,6 +1177,16 @@ config ATH79_MACH_MZK_W300NH
        select ATH79_DEV_M25P80
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_RE450
+       bool "TP-LINK RE450 board support"
+       select SOC_QCA955X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_RW2458N
        bool "Redwave RW2458N board support"
        select SOC_AR724X
@@ -933,6 +1227,17 @@ config ATH79_MACH_CR3000
        select ATH79_DEV_M25P80
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_CR5000
+       bool "PowerCloud CR5000 support"
+       select SOC_AR934X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_MR1750
        bool "OpenMesh MR1750 board support"
        select SOC_QCA955X
@@ -971,6 +1276,27 @@ config ATH79_MACH_BSB
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_ARCHER_C59_V1
+       bool "TP-LINK Archer C59 v1 support"
+       select SOC_QCA956X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
+config ATH79_MACH_ARCHER_C60_V1
+       bool "TP-LINK Archer C60 v1 support"
+       select SOC_QCA956X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_ARCHER_C7
        bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
        select SOC_QCA955X
@@ -991,6 +1317,24 @@ config ATH79_MACH_CPE510
        select ATH79_DEV_M25P80
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_CPE830
+       bool "YunCore CPE830 support"
+       select SOC_QCA953X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+
+config ATH79_MACH_CPE870
+       bool "YunCore CPE870 support"
+       select SOC_AR934X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_TL_MR11U
        bool "TP-LINK TL-MR11U/TL-MR3040 support"
        select SOC_AR933X
@@ -1051,14 +1395,23 @@ config ATH79_MACH_TL_WA701ND_V2
        select ATH79_DEV_WMAC
 
 config ATH79_MACH_TL_WA7210N_V2
-       bool "TP-LINK TL-WA7210N v2 support"
-       select SOC_AR724X
-       select ATH79_DEV_AP9X_PCI if PCI
-       select ATH79_DEV_ETH
-       select ATH79_DEV_LEDS_GPIO
-       select ATH79_DEV_GPIO_BUTTONS
-       select ATH79_DEV_M25P80
-       select ATH79_DEV_WMAC
+       bool "TP-LINK TL-WA7210N v2 support"
+       select SOC_AR724X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WA801ND_V3
+       bool "TP-LINK TL-WA801ND v3 support"
+       select SOC_QCA953X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
 
 config ATH79_MACH_TL_WA830RE_V2
        bool "TP-LINK TL-WA830RE v2 support"
@@ -1070,6 +1423,15 @@ config ATH79_MACH_TL_WA830RE_V2
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_TL_WA850RE_V2
+       bool "TP-LINK TL-WA850RE v2 support"
+       select SOC_QCA953X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_TL_WA901ND
        bool "TP-LINK TL-WA901ND/TL-WA7510N support"
        select SOC_AR724X
@@ -1088,6 +1450,15 @@ config ATH79_MACH_TL_WA901ND_V2
        select ATH79_DEV_M25P80
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_TL_WA901ND_V4
+       bool "TP-LINK TL-WA901ND v4 support"
+       select SOC_QCA956X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_TL_WDR3320_V2
        bool "TP-LINK TL-WDR3320 v2 board support"
        select SOC_AR934X
@@ -1171,6 +1542,32 @@ config ATH79_MACH_TL_WR741ND_V4
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_TL_WR802N_V1
+       bool "TP-LINK TL-WR802N v1 support"
+       select SOC_QCA953X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+
+config ATH79_MACH_TL_WR802N_V2
+       bool "TP-LINK TL-WR802N v2 support"
+       select SOC_QCA953X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+
+config ATH79_MACH_TL_WR810N
+       bool "TP-LINK TL-WR810N support"
+       select SOC_QCA953X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_TL_WR841N_V1
        bool "TP-LINK TL-WR841N v1 support"
        select SOC_AR71XX
@@ -1191,13 +1588,14 @@ config ATH79_MACH_TL_WR841N_V8
        select ATH79_DEV_WMAC
 
 config ATH79_MACH_TL_WR841N_V9
-       bool "TP-LINK TL-WR841N/ND v9 support"
-       select SOC_QCA953X
-       select ATH79_DEV_ETH
-       select ATH79_DEV_GPIO_BUTTONS
-       select ATH79_DEV_LEDS_GPIO
-       select ATH79_DEV_M25P80
-       select ATH79_DEV_WMAC
+       bool "TP-LINK TL-WR841N/ND v9/TL-WR842N/ND v3 support"
+       select SOC_QCA953X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
 
 config ATH79_MACH_TL_WR941ND
        bool "TP-LINK TL-WR941ND support"
@@ -1218,6 +1616,15 @@ config ATH79_MACH_TL_WR941ND_V6
        select ATH79_DEV_M25P80
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_TL_WR940N_V4
+       bool "TP-LINK TL-WR940N v4 support"
+       select SOC_QCA956X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_TL_WR1041N_V2
        bool "TP-LINK TL-WR1041N v2 support"
        select SOC_AR934X
@@ -1249,6 +1656,17 @@ config ATH79_MACH_TL_WR1043ND_V2
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_TL_WR1043ND_V4
+       bool "TP-LINK TL-WR1043ND v4 support"
+       select SOC_QCA956X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_TL_WR2543N
        bool "TP-LINK TL-WR2543N/ND support"
        select SOC_AR724X
@@ -1278,7 +1696,6 @@ config ATH79_MACH_TEW_673GRU
        select ATH79_DEV_LEDS_GPIO
        select ATH79_DEV_M25P80
        select ATH79_DEV_USB
-       select ATH79_NVRAM
 
 config ATH79_MACH_TEW_712BR
        bool "TRENDnet TEW-712BR support"
@@ -1288,7 +1705,6 @@ config ATH79_MACH_TEW_712BR
        select ATH79_DEV_LEDS_GPIO
        select ATH79_DEV_M25P80
        select ATH79_DEV_WMAC
-       select ATH79_NVRAM
 
 config ATH79_MACH_TEW_732BR
        bool "TRENDnet TEW-732BR support"
@@ -1318,6 +1734,17 @@ config ATH79_MACH_UBNT
        select ATH79_DEV_M25P80
        select ATH79_DEV_USB
 
+config ATH79_MACH_UBNT_UNIFIAC
+       bool "Ubiquiti UniFi AC (LITE/LR/PRO) support"
+       select SOC_QCA956X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+       select ATH79_DEV_USB
+
 config ATH79_MACH_WEIO
        bool "WeIO board"
        select SOC_AR933X
@@ -1358,6 +1785,28 @@ config ATH79_MACH_MYNET_REXT
        select ATH79_DEV_WMAC
        select ATH79_NVRAM
 
+config ATH79_MACH_Z1
+       bool "Meraki Z1 board support"
+       select SOC_AR934X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_NFC
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+       select LEDS_NU801
+
+config ATH79_MACH_ZBT_WE1526
+       bool "Zbtlink ZBT-WE1526 board support"
+       select SOC_QCA953X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_ZCN_1523H
        bool "Zcomax ZCN-1523H support"
        select SOC_AR724X
@@ -1386,6 +1835,7 @@ config ATH79_MACH_NBG6716
        select ATH79_DEV_NFC
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
+       select ATH79_NVRAM
 
 config ATH79_MACH_CARAMBOLA2
        bool "8devices Carambola2 board"
@@ -1397,8 +1847,19 @@ config ATH79_MACH_CARAMBOLA2
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_LIMA
+       bool "8devices Lima board"
+       select SOC_QCA953X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_SPI
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+       select ATH79_DEV_ETH
+
 config ATH79_MACH_CF_E316N_V2
-       bool "COMFAST CF-E316N v2 board"
+       bool "COMFAST CF-E316N v2 support"
        select SOC_AR934X
        select ATH79_DEV_ETH
        select ATH79_DEV_GPIO_BUTTONS
@@ -1407,6 +1868,58 @@ config ATH79_MACH_CF_E316N_V2
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_CF_E320N_V2
+       bool "COMFAST CF-E320N v2 support"
+       select SOC_QCA953X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
+config ATH79_MACH_CF_E380AC_V1
+       bool "COMFAST CF-E380AC v1 support"
+       select SOC_QCA955X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
+config ATH79_MACH_CF_E380AC_V2
+       bool "COMFAST CF-E380AC v2 support"
+       select SOC_QCA955X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
+config ATH79_MACH_CF_E520N
+       bool "COMFAST CF-E520N support"
+       select SOC_QCA953X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
+config ATH79_MACH_CF_E530N
+       bool "COMFAST CF-E530N support"
+       select SOC_QCA953X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_BHU_BXU2000N2_A
        bool "BHU BXU2000n-2 rev. A support"
        select SOC_AR934X
@@ -1427,3 +1940,23 @@ config ATH79_MACH_QIHOO_C301
        select ATH79_DEV_WMAC
        select ATH79_DEV_USB
        select ATH79_NVRAM
+
+config ATH79_MACH_DAP_2695_A1
+       bool "D-Link DAP-2695 rev. A1 support"
+       select SOC_QCA955X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+       select ATH79_NVRAM
+
+config ATH79_MACH_TL_WPA8630
+       bool "TP-Link TL-WPA8630 support"
+       select SOC_QCA956X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC