ar71xx: add support for Buffalo BHR-4GRV2

[openwrt/staging/wigyori.git] / target / linux / ar71xx / files / arch / mips / ath79 / Kconfig.openwrt

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 3084155673714e83ec656c723c832921390f087b..ac8255b8a321867a3596e8442e764b0b67d501c6 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -271,6 +271,14 @@ config ATH79_MACH_SOM9331
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_BHR_4GRV2
+       bool "Buffalo BHR-4GRV2 board support"
+       select SOC_QCA955X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+
 config ATH79_MACH_WHR_HP_G300N
        bool "Buffalo WHR-HP-G300N board support"
        select SOC_AR724X
@@ -534,6 +542,22 @@ config ATH79_MACH_DLAN_PRO_1200_AC
        select ATH79_DEV_NFC
        select ATH79_DEV_USB
 
+config ATH79_MACH_DOMYWIFI_DW33D
+       bool "DomyWifi DW33D support"
+       select SOC_QCA955X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_NFC
+       select ATH79_DEV_WMAC
+       select ATH79_DEV_USB
+       select MTD_NAND
+       select MTD_NAND_ECC
+       select MTD_NAND_AR934X
+       select MTD_NAND_AR934X_HW_ECC
+
 config ATH79_MACH_DR344
        bool "Wallys DR344 board support"
        select SOC_AS934X
@@ -666,6 +690,15 @@ config ATH79_MACH_GL_INET
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_EAP120
+       bool "TP-LINK EAP120 support"
+       select SOC_AR934X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_EAP300V2
        bool "EnGenius EAP300 v2 support"
        select SOC_AR934X
@@ -1365,6 +1398,14 @@ config ATH79_MACH_TL_WR741ND_V4
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_TL_WR802N_V1
+       bool "TP-LINK TL-WR802N v1 support"
+       select SOC_QCA953X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+
 config ATH79_MACH_TL_WR810N
        bool "TP-LINK TL-WR810N support"
        select SOC_QCA953X
@@ -1665,3 +1706,23 @@ config ATH79_MACH_QIHOO_C301
        select ATH79_DEV_WMAC
        select ATH79_DEV_USB
        select ATH79_NVRAM
+
+config ATH79_MACH_DAP_2695_A1
+       bool "D-Link DAP-2695 rev. A1 support"
+       select SOC_QCA955X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WPA8630
+       bool "TP-Link TL-WPA8630 support"
+       select SOC_QCA956X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+