ath79: Add support for Ubiquiti Nanostation M (XW)

[openwrt/staging/wigyori.git] / target / linux / ath79 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 1a83d56cc75dfd0c0444142c82b7a27e10a28627..9a7f2d6472b78b8a50f2e71e6a6db9c90f382205 100755 (executable)
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -10,22 +10,41 @@ ath79_setup_interfaces()
 
        case "$board" in
        avm,fritz300e|\
+       devolo,dvl1200i|\
+       devolo,dvl1750c|\
+       devolo,dvl1750i|\
        ocedo,koala|\
        ocedo,raccoon|\
        pcs,cap324|\
        pisen,wmm003n|\
+       pqi,air-pen|\
        tplink,re450-v2|\
        tplink,tl-mr10u|\
        tplink,tl-mr3020-v1|\
        tplink,tl-mr3040-v2|\
+       tplink,tl-wa901nd-v2|\
        tplink,tl-wr703n|\
        ubnt,bullet-m|\
+       ubnt,bullet-m-xw|\
+       ubnt,lap-120|\
+       ubnt,nanostation-ac-loco|\
        ubnt,rocket-m|\
        ubnt,unifiac-lite|\
        ubnt,unifiac-mesh|\
-       ubnt,unifi)
+       ubnt,unifi|\
+       wd,mynet-wifi-rangeextender|\
+       winchannel,wb2000)
                ucidef_set_interface_lan "eth0"
                ;;
+       avm,fritz4020|\
+       pcs,cr3000|\
+       tplink,archer-c58-v1|\
+       tplink,archer-c59-v1)
+               ucidef_set_interface_wan "eth0"
+               ucidef_add_switch "switch0" \
+                       "0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
+               ;;
+       buffalo,bhr-4grv|\
        buffalo,wzr-hp-g450h)
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
@@ -34,29 +53,72 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth0"
                ;;
+       buffalo,wzr-hp-ag300h)
+               ucidef_set_interface_wan "eth1"
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
+               ;;
+       buffalo,wzr-hp-g302h-a1a0)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "1:lan:1" "3:lan:4" "4:lan:3" "5:lan:2" "2:wan"
+               ;;
+       devolo,dvl1200e|\
+       devolo,dvl1750e)
+               ucidef_set_interface_lan "eth0 eth1"
+               ;;
        dlink,dir-825-b1)
                ucidef_set_interface_wan "eth1"
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
                ;;
+       dlink,dir-825-c1|\
+       dlink,dir-835-a1|\
+       dlink,dir-859-a1|\
+       tplink,archer-c2-v3|\
+       tplink,tl-wr1043nd-v4)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
+               ;;
+       elecom,wrc-1750ghbk2-i|\
+       elecom,wrc-300ghbk2-i)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan"
+               ;;
        embeddedwireless,dorin)
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:wan" "2:lan:3" "3:lan:2"
                ;;
+       engenius,ews511ap)
+               ucidef_set_interface_lan "eth0 eth1" "dhcp"
+               ;;
        etactica,eg200)
                ucidef_set_interface_lan "eth0" "dhcp"
                ;;
-       avm,fritz4020|\
-       glinet,ar150|\
-       glinet,ar300m)
+       glinet,gl-ar150|\
+       glinet,gl-ar300m-nand|\
+       glinet,gl-ar300m-nor|\
+       glinet,gl-x750|\
+       tplink,tl-wr810n-v1|\
+       tplink,tl-wr810n-v2|\
+       ubnt,routerstation)
                ucidef_set_interfaces_lan_wan "eth1" "eth0"
                ;;
+       glinet,gl-ar750s)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "2:lan:2" "3:lan:1" "1:wan"
+               ;;
        iodata,etg3-r|\
        iodata,wn-ac1167dgr|\
+       iodata,wn-ac1600dgr|\
        iodata,wn-ac1600dgr2|\
+       iodata,wn-ag300dgr|\
        pcs,cr5000)
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+       ;;
+       nec,wg800hp)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "2:lan" "3:lan" "4:lan" "1:wan"
                ;;
        netgear,wndr3700|\
        netgear,wndr3700v2|\
@@ -70,20 +132,21 @@ ath79_setup_interfaces()
                ucidef_add_switch_port_attr "switch0" 5 led 2
                ;;
        netgear,wnr612-v2|\
-       on,n150r)
+       on,n150r|\
+       tplink,tl-wr841-v7)
                ucidef_set_interface_wan "eth0"
                ucidef_add_switch "switch0" \
-               "0@eth1" "1:lan" "2:lan" "3:lan:3" "4:lan:4"
-               ;;
-       pcs,cr3000)
-               ucidef_add_switch "switch0" \
-                       "0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
-               ucidef_set_interface_wan "eth0"
+               "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
                ;;
        phicomm,k2t)
                ucidef_add_switch "switch0" \
                        "0@eth0" "3:lan:1" "5:lan:2" "4:wan"
                ;;
+       rosinson,wr818)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "1:lan" "2:lan" "3:wan"
+               ;;
+       tplink,archer-c5-v1|\
        tplink,archer-c7-v1|\
        tplink,archer-c7-v2|\
        tplink,tl-wdr4900-v2)
@@ -93,11 +156,17 @@ ath79_setup_interfaces()
        buffalo,whr-g301n|\
        tplink,tl-mr3220-v1|\
        tplink,tl-mr3420-v1|\
-       tplink,tl-wr841-v7)
+       tplink,tl-wr841-v9|\
+       tplink,tl-wr841-v11|\
+       ubnt,airrouter)
                ucidef_set_interface_wan "eth0"
                ucidef_add_switch "switch0" \
                        "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
                ;;
+       tplink,archer-a7-v5|\
+       tplink,archer-c6-v2|\
+       tplink,archer-c7-v4|\
+       tplink,archer-c7-v5|\
        tplink,tl-wdr3600|\
        tplink,tl-wdr4300)
                ucidef_add_switch "switch0" \
@@ -112,10 +181,6 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0"
                ;;
-       tplink,tl-wr1043nd-v4)
-               ucidef_add_switch "switch0" \
-                       "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
-               ;;
        tplink,tl-wr2543-v1)
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
@@ -130,22 +195,38 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
                ;;
-       tplink,tl-wr740nd-v4|\
+       tplink,tl-wr740n-v4|\
        tplink,tl-wr741nd-v4|\
-       tplink,tl-wr841-v9|\
-       tplink,tl-wr841-v11)
+       tplink,tl-wr841-v8|\
+       tplink,tl-wr842n-v1|\
+       tplink,tl-wr842n-v2)
                ucidef_set_interface_wan "eth0"
                ucidef_add_switch "switch0" \
-                       "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
+                       "0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
                ;;
        tplink,tl-wr941-v2)
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
                ;;
+       ubnt,routerstation-pro)
+               ucidef_set_interface_wan "eth0"
+               ucidef_add_switch "switch0" \
+                       "0@eth1" "2:lan:3" "3:lan:2" "4:lan:1"
+               ;;
+       ubnt,nanostation-m-xw)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "5:lan" "1:wan"
+               ;;
+       ubnt,nanostation-ac|\
        ubnt,unifiac-mesh-pro|\
        ubnt,unifiac-pro)
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan" "3:wan"
                ;;
+       xiaomi,mi-router-4q)
+               ucidef_set_interface_wan "eth0"
+               ucidef_add_switch "switch0" \
+                       "0@eth1" "3:lan:1" "4:lan:2"
+               ;;
        *)
                ucidef_set_interfaces_lan_wan "eth0" "eth1"
                ;;
@@ -168,15 +249,40 @@ ath79_setup_macs()
                lan_mac=$(mtd_get_mac_text "caldata" 65440)
                wan_mac=$(mtd_get_mac_text "caldata" 65460)
                ;;
+       dlink,dir-825-c1|\
+       dlink,dir-835-a1)
+               lan_mac=$(mtd_get_mac_text "mac" 4)
+               wan_mac=$(mtd_get_mac_text "mac" 24)
+               ;;
+       dlink,dir-859-a1)
+               lan_mac=$(mtd_get_mac_ascii devdata "lanmac")
+               wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
+               ;;
+       elecom,wrc-1750ghbk2-i|\
+       elecom,wrc-300ghbk2-i)
+               wan_mac=$(macaddr_add "$(mtd_get_mac_binary ART 4098)" -2)
+               ;;
+       engenius,ews511ap)
+               lan_mac=$(mtd_get_mac_text "u-boot-env" 233)
+               eth1_mac=$(macaddr_add "$lan_mac" 1)
+               ucidef_set_interface "eth0" ifname "eth0" protocol "none" macaddr "$lan_mac"
+               ucidef_set_interface "eth1" ifname "eth1" protocol "none" macaddr "$eth1_mac"
+               ;;
        iodata,etg3-r)
                lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
                wan_mac=$(macaddr_add "$lan_mac" -1)
                ;;
        iodata,wn-ac1167dgr|\
-       iodata,wn-ac1600dgr2)
+       iodata,wn-ac1600dgr|\
+       iodata,wn-ac1600dgr2|\
+       iodata,wn-ag300dgr)
                lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
                wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
                ;;
+       nec,wg800hp)
+               lan_mac=$(mtd_get_mac_text board_data 640)
+               wan_mac=$(mtd_get_mac_text board_data 1152)
+               ;;
        netgear,wndr3700|\
        netgear,wndr3700v2|\
        netgear,wndr3800)
@@ -186,6 +292,14 @@ ath79_setup_macs()
                lan_mac=$(k2t_get_mac "lan_mac")
                wan_mac=$(k2t_get_mac "wan_mac")
                ;;
+       rosinson,wr818)
+               wan_mac=$(mtd_get_mac_binary factory 0)
+               lan_mac=$(macaddr_setbit_la "$wan_mac")
+               ;;
+       tplink,archer-c7-v4)
+               base_mac=$(mtd_get_mac_binary config 8)
+               wan_mac=$(macaddr_add "$base_mac" 1)
+               ;;
        tplink,tl-wr1043nd-v4)
                base_mac=$(mtd_get_mac_binary product-info 8)
                wan_mac=$(macaddr_add "$base_mac" 1)
@@ -194,6 +308,14 @@ ath79_setup_macs()
                base_mac=$(mtd_get_mac_binary u-boot 130048)
                wan_mac=$(macaddr_add "$base_mac" 1)
                ;;
+       ubnt,routerstation|\
+       ubnt,routerstation-pro)
+               wan_mac=$(fconfig -s -r -d $(find_mtd_part "RedBoot config") -n ar7100_esa)
+               lan_mac=$(macaddr_add "$wan_mac" 1)
+               ;;
+       wd,mynet-wifi-rangeextender)
+               lan_mac=$(nvram get et0macaddr)
+               ;;
        esac
 
        [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac